CO2-Box Platine

LouisNikolaus·GFS---CO2-Ampel·CO2-Box-mit-Summer-und-OLed/Platine/CO2-Box_Platine.kicad_pcb

CO2-Box Platine PCB layout, top view — open source board by LouisNikolaus

About the CO2-Box Platine PCB

CO2-Box Platine is an open source PCB design by LouisNikolaus, published on GitHub. It is a 2-layer board measuring 65 × 43 mm, with 16 components from 15 distinct parts.

Other key parts include the MP1584-Modul (auf 5V einstellen). By type, the board carries 5 connectors, 3 resistors, 2 diodes, 2 capacitors, 1 IC and 1 transformer.

It belongs with the sensors and displays & leds designs in this gallery.

From the project

Trägerplatine 100 × 60 mm (2 Lagen, nur THT-Bauteile) + 3D-gedrucktes Gehäuse 105 × 65 × 27 mm.

Trägerplatine 100 × 60 mm (2 Lagen, nur THT-Bauteile) + 3D-gedrucktes Gehäuse 105 × 65 × 27 mm.

- 2 × Buchsenleiste 1×8, RM 2,54 (für den D1 mini) - 4 × Schraube M3 × 8 (Platine auf Abstandshalter, selbstschneidend) - Aktiver Summer 5 V, 12 mm, Rastermaß 7,6 mm - Taster 6 × 6 mm mit 13 mm Bauhöhe

1. Pinfolge des CO2-Sensors: J2 ist VCC–GND–SCL–SDA belegt. Das Sensormodul (SCD40/SCD41/SCD30 …) vergleichen. 2. Pinfolge des OLED: J1 ist GND–VCC–SCL–SDA belegt. Manche Displays haben VCC–GND! 3. JP1 (Lötbrücke): ab Werk 3,3 V für den Sensor. Für 5 V die Brücke 1-2 auftrennen und 2-3 verbinden.…

Main components on the CO2-Box Platine

MP1584-Modul (auf 5V einstellen)

CO2-Box Platine bill of materials (BOM)

16 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MP1584-Modul (auf 5V einstellen)
U1
1
24V IN
J1
1
ESP hinten
J2
1
ESP vorn
J3
1
SHT30-Platine
J4
1
OLED I2C
J5
1
1N4148 Freilauf
DF1
1
Summer aktiv 5V
SUM1
1
BC547 NPN
T1
1
RGB links
D1
1
RGB rechts
D2
1
100UF
10u/50V Elko
C1
1
10u/16V Elko
C2
2
150
R1, R2
1
220
1k
R3

CO2-Box Platine design files

The KiCad project lives in the LouisNikolaus/GFS---CO2-Ampel repository on GitHub; these links point at the commit this page was built from.

CO2-Box Platine: common questions

How big is the CO2-Box Platine PCB?

The CO2-Box Platine measures 65 × 43 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CO2-Box Platine?

16 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the CO2-Box Platine design files?

From the LouisNikolaus/GFS---CO2-Ampel repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the CO2-Box Platine design in my own project?

The repository has no license, so all rights stay with LouisNikolaus. Use it as a reference, and ask the author before reusing the design.

More boards in GFS---CO2-Ampel

Similar boards