Led balance
lucanastasio·myHomeAutomation·hardware/led_balance/led_balance.kicad_pcb
About the Led balance PCB
Led balance is an open source PCB design by lucanastasio, published on GitHub. It is a 2-layer board measuring 100 × 60 mm, with 94 components from 13 distinct parts.
By type, the board carries 34 resistors, 24 transistors, 20 diodes, 8 connectors and 4 test points.
From the project
Home automation stuff
- Dimmer: LED APA102-2020, 4 PWM ch. - Central: 4 PWM ch., radar UART, air valve 4 pin
Led balance bill of materials (BOM)
94 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | Q_NMOS_GDS | TO-220-3_Horizontal_TabUp | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 8 | Q_NPN_BEC | SOT-23_Handsoldering | Q17, Q19, Q21, Q23, Q25, Q27, Q29, Q31 |
| 8 | Q_PNP_BEC | SOT-23_Handsoldering | Q18, Q20, Q22, Q24, Q26, Q28, Q30, Q32 |
| 4 | Screw_Terminal_01x04 | PhoenixContact_MC_1,5_4-G-3.81_1x04_P3.81mm_Horizontal | J1, J3, J4, J5 |
| 4 | Screw_Terminal_01x02 | PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | J2, J6, J7, J8 |
| 4 | Thermistor | TO-220-2_Horizontal_TabUp | TH1, TH2, TH3, TH4 |
| 4 | TestPoint_2Pole | TestPoint_2Pads_Pitch5.08mm_Drill1.3mm | TP5, TP6, TP7, TP8 |
| 8 | 1N4148 | D_SOD-323_HandSoldering | D1, D4, D7, D10, D13, D16, D19, D22 |
| 4 | D_Zener | D_SOD-323_HandSoldering | D2, D3, D5, D6 |
| 8 | 1N5333B | D_DO-27_P12.70mm_Horizontal | D20, D21, D23, D24, D25, D26, D27, D28 |
| 24 | R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R4, R6, R7, R9, R10, R12 +16 |
| 8 | R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R5, R8, R11, R20, R23, R26, R29 |
| 2 | R | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R17, R18 |
Led balance design files
The KiCad project lives in the lucanastasio/myHomeAutomation repository on GitHub; these links point at the commit this page was built from.
Led balance: common questions
How big is the Led balance PCB?
The Led balance measures 100 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Led balance?
94 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Led balance design files?
From the lucanastasio/myHomeAutomation repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Led balance design in my own project?
The repository has no license, so all rights stay with lucanastasio. Use it as a reference, and ask the author before reusing the design.
More boards in myHomeAutomation
AVR/Arduino
Control panel
lucanastasio
65 × 58 mm158 parts2LNo license1AVR/Arduino
Swing
lucanastasio
50 × 50 mm146 parts4LNo license1AVR/Arduino
Heating controller
lucanastasio
100 × 50 mm145 parts2LNo license1AVR/Arduino
Room hub
lucanastasio
50 × 50 mm121 parts2LNo license1Corridor distribution
lucanastasio
60 × 100 mm81 parts2LNo license1ADV7280-M
lucanastasio
50 × 36 mm77 parts4LNo license1Knob top 30
lucanastasio
25 × 25 mm65 parts2LNo license1Corridor node
lucanastasio
40 × 40 mm57 parts2LNo license1AVR/Arduino
Generic node
lucanastasio
48.9 × 17.8 mm47 parts4LNo license1Repeater
lucanastasio
55 × 35 mm41 parts2LNo license1AVR/Arduino
Slider
lucanastasio
44 × 39 mm35 parts2LNo license1