Corridor node
About the Corridor node PCB
Corridor node is an open source PCB design by lucanastasio, published on GitHub. It is a 2-layer board measuring 40 × 40 mm, with 57 components from 31 distinct parts.
Other key parts include the SD3361, LMV321, TTY020-CA6, AP7384-50SA and PIR. By type, the board carries 21 capacitors, 16 resistors, 8 ICs, 6 diodes, 3 inductors and 2 jumpers.
From the project
Home automation stuff
- Dimmer: LED APA102-2020, 4 PWM ch. - Central: 4 PWM ch., radar UART, air valve 4 pin
Main components on the Corridor node
Corridor node bill of materials (BOM)
57 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | SD3361 | SOT-23-5 | U1, U2 |
| 1 | LMV321 | SOT-23-5 | U3 |
| 1 | TTY020-CA6 | SOT-23-6 | U4 |
| 1 | AP7384-50SA | SOT-23 | U5 |
| 1 | PIR | TO-5-3_Window | U6 |
| 1 | 74LVC2G17 | SOT-23-6 | U7 |
| 1 | LMV358 | MSOP-8_3x3mm_P0.65mm | U8 |
| 1 | 500mA | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 2 | SolderJumper_3_Open | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1, JP2 |
| 2 | SM05 | SOT-23_Handsoldering | D1, D2 |
| 1 | SMF36A | D_SOD-123F | D3 |
| 2 | RB160VA-40TR | D_TUMD2 | D4, D5 |
| 1 | TEPT5700 | LED_D3.0mm_Clear | D6 |
| 1 | MMZ2012R102AT000 | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1 |
| 2 | 100uH | L_Taiyo-Yuden_NR-50xx_HandSoldering | L1, L2 |
| 1 | 470uF 50V | CP_Radial_D10.0mm_P5.00mm | C1 |
| 4 | 10u 50V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4, C5 |
| 1 | 1n 1kV | C_0603_1608Metric | C6 |
| 2 | 100n 50V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C9 |
| 9 | 100n 50V | C_0603_1608Metric | C8, C10, C15, C16, C17, C18, C19, C20 +1 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10u 16V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11 |
| 2 | 10u 50V | C_0805_2012Metric | C12, C13 |
| 1 | 22u 10V | C_0805_2012Metric | C14 |
| 2 | 0.4 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
| 1 | 1M | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 2 | 100 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
| 1 | 2M | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 47k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 6 | 100k | R_0603_1608Metric | R11, R12, R13, R14, R15, R16 |
Corridor node design files
The KiCad project lives in the lucanastasio/myHomeAutomation repository on GitHub; these links point at the commit this page was built from.
Corridor node: common questions
How big is the Corridor node PCB?
The Corridor node measures 40 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Corridor node?
57 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the Corridor node design files?
From the lucanastasio/myHomeAutomation repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Corridor node design in my own project?
The repository has no license, so all rights stay with lucanastasio. Use it as a reference, and ask the author before reusing the design.
More boards in myHomeAutomation
AVR/ArduinoControl panel
65 × 58 mm158 parts2LNo license1
AVR/ArduinoSwing
50 × 50 mm146 parts4LNo license1
AVR/ArduinoHeating controller
100 × 50 mm145 parts2LNo license1
AVR/ArduinoRoom hub
50 × 50 mm121 parts2LNo license1
Led balance
100 × 60 mm94 parts2LNo license1
Corridor distribution
60 × 100 mm81 parts2LNo license1
ADV7280-M
50 × 36 mm77 parts4LNo license1
Knob top 30
25 × 25 mm65 parts2LNo license1
AVR/ArduinoGeneric node
48.9 × 17.8 mm47 parts4LNo license1
Repeater
55 × 35 mm41 parts2LNo license1
AVR/ArduinoSlider
44 × 39 mm35 parts2LNo license1