Luci sdk encoders
About the Luci sdk encoders PCB
Luci sdk encoders is an open source AVR/Arduino PCB design by lucimobility, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 68.6 × 53.3 mm, with 25 components from 22 distinct parts.
Its main chip is the Arduino_1pin, from the AVR/Arduino family. Other key parts include the TCA9548A. By type, the board carries 14 connectors, 2 resistors, 1 IC, 1 switch and 1 diode.
It belongs with the sensors designs in this gallery.
From the project
Design files and documentation for power wheelchair encoders compatible with the LUCI sensor system
Main components on the Luci sdk encoders
Luci sdk encoders bill of materials (BOM)
25 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TCA9548A | TCA9548A | U1 |
| 1 | Power_1 | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J1 |
| 1 | Power_2 | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J2 |
| 1 | Power_4 | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J3 |
| 1 | Power_3 | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J4 |
| 1 | Power_5 | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J5 |
| 1 | Power_6 | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J6 |
| 1 | Power | Socket_Strip_Arduino_1x08 | P1 |
| 1 | Analog | Socket_Strip_Arduino_1x06 | P2 |
| 1 | Digital | Socket_Strip_Arduino_1x10 | P3 |
| 1 | Digital | Socket_Strip_Arduino_1x08 | P4 |
| 4 | CONN_01X01 | Arduino_1pin | P5, P6, P7, P8 |
| 1 | FL_caster | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | E1 |
| 1 | L_wheel | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | E2 |
| 1 | BL_caster | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | E3 |
| 1 | BR_caster | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | E4 |
| 1 | R_wheel | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | E5 |
| 1 | FR_caster | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | E6 |
| 1 | SW_DIP_x01 | SW_DIP_SPSTx01_Slide_Copal_CHS-01B_W7.62mm_P1.27mm | SW1 |
| 1 | LED | LED_D5.0mm | D1 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
Luci sdk encoders design files
The KiCad project lives in the lucimobility/luci-sdk-encoders repository on GitHub; these links point at the commit this page was built from.
- LayoutShield/Shiled.kicad_pcb
- SchematicShield/Shiled.kicad_sch
Luci sdk encoders: common questions
What microcontroller does the Luci sdk encoders use?
The Luci sdk encoders is built around the Arduino_1pin, from the AVR/Arduino family.
How big is the Luci sdk encoders PCB?
The Luci sdk encoders measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Luci sdk encoders?
25 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Luci sdk encoders design files?
From the lucimobility/luci-sdk-encoders repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Luci sdk encoders design in my own project?
Yes, under the terms of its Apache-2.0 license, which lucimobility chose for the repository.
Can I test firmware for the Luci sdk encoders without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k
AVR/ArduinoMegadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746