Corner board wson6
lutetjeff·ece395·corner-board/corner-board-wson6.kicad_pcb
About the Corner board wson6
Corner board wson6 is an open source STM32 PCB design by lutetjeff, published on GitHub. It is a 2-layer board measuring 76.2 × 76.2 mm, with 45 components from 22 distinct parts.
Its main chip is the STM32F042F6PX, from the STM32 family. Other key parts include the TLV76733DRVX, PTCAN3414DR and ADS131M04IPWT. By type, the board carries 15 resistors, 12 capacitors, 6 diodes, 5 connectors, 4 ICs and 3 switches.
From the project
Repository for UIUC ECE395 project known as RHipoff. A mixture of the Rhythm Horizon and RE:Flex Dance platforms built from the ground up. Current configuration is for four load cells only, but firmware supports up to 16 different panels with four load cells each.
Main components on the Corner board wson6
Corner board wson6 bill of materials (BOM)
45 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F042F6PX STM32F042F6Px | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | TLV76733DRVX TLV76733DRVx | WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalVias | U2 |
| 1 | PTCAN3414DR | SOIC8_D_TEX | U3 |
| 1 | ADS131M04IPWT | PW20_TEX | U4 |
| 1 | MAIN | JST_XH_S6B-XH-A_1x06_P2.50mm_Horizontal | J1 |
| 1 | LOAD CELL 1 | JST_XH_S3B-XH-A_1x03_P2.50mm_Horizontal | J2 |
| 1 | LOAD CELL 2 | JST_XH_S3B-XH-A_1x03_P2.50mm_Horizontal | J3 |
| 1 | LOAD CELL 3 | JST_XH_S3B-XH-A_1x03_P2.50mm_Horizontal | J4 |
| 1 | LOAD CELL 4 | JST_XH_S3B-XH-A_1x03_P2.50mm_Horizontal | J5 |
| 1 | SW_DIP_x04 | SW_DIP_SPSTx04_Slide_6.7x11.72mm_W7.62mm_P2.54mm_LowProfile | SW1 |
| 2 | SW_Push | SW_PUSH_6mm | SW2, SW3 |
| 4 | BAT54S | SOT-23 | D1, D2, D3, D4 |
| 1 | C2296 YELLOW | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 1 | C2297 GREEN | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6 |
| 1 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 2.2U 2.2u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 9 | 100N 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C5, C7, C8, C9, C10, C11 +1 |
| 1 | 220N 220n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 2 | C110776 1k 0.1% | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 4 | 2.2 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R6, R7 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9, R10, R11, R12, R15, R16 |
| 2 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R14 |
Corner board wson6 design files
The KiCad project lives in the lutetjeff/ece395 repository on GitHub; these links point at the commit this page was built from.
Corner board wson6: common questions
What microcontroller does the Corner board wson6 use?
The Corner board wson6 is built around the STM32F042F6PX, from the STM32 family.
How big is the Corner board wson6?
The Corner board wson6 measures 76.2 × 76.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Corner board wson6?
45 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Corner board wson6 design files?
From the lutetjeff/ece395 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Corner board wson6 design in my own project?
The repository has no license, so all rights stay with lutetjeff. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Corner board wson6 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in ece395
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k