21 open source boards using the STM32F042F6Px

Real designs built with the STM32F042F6Px, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

21 boardsClear filters|Most starred

How designs wire the STM32F042F6Px

Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the STM32F042F6Px connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 14 of 15 designs, most often 100 nF (then 1 µF).
  • The VDDA pin has a decoupling capacitor on 11 of 15 designs, most often 100 nF (then 1 µF).
  • The NRST pin has a capacitor to GND on 9 of 15 designs, most often 100 nF (then 470 nF).
  • The PB8 pin has a resistor to GND on 6 of 15 designs, most often 10 kΩ.
PB8pin 1Connected to: A connector 31%
  • Resistor to GND on 40% · 10 kΩ (4)
NRSTpin 4Connected to: A connector 73%
  • Capacitor to GND on 60% · 100 nF (6), 470 nF (1)
  • Pull-up to 3.3V on 33% · 10 kΩ (5)
VDDApin 5Connected to: 3.3V 80%
  • Decoupling capacitor on 73% · 100 nF (7), 1 µF (3), 10 nF (2)
PA1pin 7Connected to: A connector 27%
  • Series resistor on 40% · 100 Ω (1), 3.3 kΩ (1), 10 kΩ (1)
VSSApin 15Connected to: GND 93%
VDDpin 16Connected to: 3.3V 89%
  • Decoupling capacitor on 93% · 100 nF (17), 1 µF (3), 4.7 µF (3)

14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Rectifier by rene-dev, EF-S-Adapter by Jana-Marie, Klipper-Expander by timmit99 and Switch by Jochen0x90h.

The STM32F042F6Px in open source designs

The gallery holds 21 open source boards using the STM32F042F6Px from 15 GitHub repositories; a typical one measures about 76.2 × 56 mm and carries around 44 components.

81% are two-layer designs, the rest use four layers or more, and 48% carry an open source license.

The most starred is Rectifier by rene-dev.

Parts used alongside the STM32F042F6Px

Microcontrollers on boards using the STM32F042F6Px

STM32F042F6Px: common questions

Where can I find a STM32F042F6Px reference design?

Each of the 21 boards on this page is a real design using the STM32F042F6Px. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32F042F6Px VDD pin?

The VDD pin has a decoupling capacitor on 14 of 15 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 15 open source designs using the STM32F042F6Px.

What decoupling capacitors do designs use on the STM32F042F6Px VDDA pin?

The VDDA pin has a decoupling capacitor on 11 of 15 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 15 open source designs using the STM32F042F6Px.

How is the STM32F042F6Px NRST pin connected?

The NRST pin has a capacitor to GND on 9 of 15 designs, most often 100 nF (then 470 nF). Counted from the KiCad layouts of 15 open source designs using the STM32F042F6Px.

What parts are used alongside the STM32F042F6Px?

The ACT4088, lnk304D and LTV-817 appear in the most repositories here.

Which microcontrollers do boards using the STM32F042F6Px use?

Most are built on STM32 (21).

How big is a typical board using the STM32F042F6Px?

The median is 76.2 × 56 mm, and 81% are two-layer designs.

What is the most popular open source board using the STM32F042F6Px?

By GitHub stars, Rectifier by rene-dev, with 979 stars.

Can I simulate one of these boards using the STM32F042F6Px before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part