METAL AIR BMS

MAATHES-THILAK-K·METAL_AIR_BMS·HARDWARE/Metal-Air_BMS.kicad_pcb

METAL AIR BMS PCB layout, top view — open source STM32 board by MAATHES-THILAK-K

About the METAL AIR BMS PCB

METAL AIR BMS is an open source STM32 PCB design by MAATHES-THILAK-K, published on GitHub under the Custom license license. It is a 2-layer board measuring 102.8 × 46.5 mm, with 68 components from 46 distinct parts.

Its main chip is the STM32G0B1CBTx, from the STM32 family. Other key parts include the SSP7603P33M5R, INA226, SN65HVD230 and TS912ID. By type, the board carries 21 resistors, 16 capacitors, 10 connectors, 5 ICs, 5 diodes and 3 transistors.

It belongs with the power & battery and sensors designs in this gallery.

From the project

STM32-based Single Cell Metal-Air Battery Management System (BMS) featuring real-time voltage/current monitoring, temperature sensing, hydrogen gas detection, protection mechanisms, UART communication, and a Python-based monitoring & data logging application.

The Metal-Air Single Cell Battery Management System (BMS) is a custom embedded system designed to safely monitor and protect a single-cell Metal-Air battery. The project is built around the STM32G0B1CBT6 microcontroller and provides real-time monitoring of battery voltage, current, temperature, and hydrogen gas concentration while implementing multiple protection mechanisms to ensure reliable battery operation.

METAL AIR BMS, from the project README
From the project README

Main components on the METAL AIR BMS

SSP7603P33M5RSTM32G0B1CBTxINA226SN65HVD230TS912ID

METAL AIR BMS bill of materials (BOM)

68 components, 46 distinct parts.

QtyPartRefs
1
SSP7603P33M5R
U1
1
STM32G0B1CBTx
U2
1
INA226
U3
1
SN65HVD230
U4
1
TS912ID
TS912IDT
U5
2
CMN2302M
Q1, Q2
1
BC547
Q3
1
8MHz
Y1
1
USB 3.1 Type-C 6
J1
1
01x05
J2
1
01x02
J3
1
01x03
J4
2
01x03
J5, J10
1
01x02
J6
1
01x02
J7
1
LOAD
J8
1
01x04
J9
1
Fuse
F1
1
IRLB8743PBF
MOSFET1
1
10k
RV1
Show 26 more
QtyPartRefs
2
PUSH
SW1, SW2
1
100k ,B=3950
TH1
2
TVS_DUAL
D1, D5
1
LED
D2
1
RB550V
D3
1
ST2045L
D4
1
220R @ 100MHz
FB1
4
100nF
C1, C2, C5, C6
2
6.8uF
C3, C7
1
1uF
C4
1
4.7uF
C8
1
10uF
C9
5
100nF
C10, C13, C14, C15, C16
2
30pF
C11, C12
2
5.1k
R1, R2
1
1k
R3
2
4k7
R4, R5
2
10k
R6, R9
1
620
R7
1
330
R8
6
10k
R10, R12, R14, R15, R18, R20
2
100
R11, R13
1
4k7
R16
1
3m
R17
1
0
R19
1
120
R21

METAL AIR BMS design files

The KiCad project lives in the MAATHES-THILAK-K/METAL_AIR_BMS repository on GitHub; these links point at the commit this page was built from.

METAL AIR BMS: common questions

What microcontroller does the METAL AIR BMS use?

The METAL AIR BMS is built around the STM32G0B1CBTx, from the STM32 family.

How big is the METAL AIR BMS PCB?

The METAL AIR BMS measures 102.8 × 46.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the METAL AIR BMS?

68 components, from 46 distinct parts. The full bill of materials is listed on this page.

Where can I download the METAL AIR BMS design files?

From the MAATHES-THILAK-K/METAL_AIR_BMS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the METAL AIR BMS design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the METAL AIR BMS without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards