Discharge Circuit Final
About the Discharge Circuit Final PCB
Discharge Circuit Final is an open source PCB design by MADHURAMAN-afk, published on GitHub. It is a 2-layer board measuring 74.1 × 64.6 mm, with 10 components from 8 distinct parts.
By type, the board carries 6 connectors, 2 fuses and 2 relays.
Discharge Circuit Final bill of materials (BOM)
10 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Shutdown Status | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | from discharge resistor | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | Motor Controller +ve terminal | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | to discharge resistor | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J5 |
| 1 | to discharge relay | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J6 |
| 2 | 500MA 500mA | Fuse_BelFuse_0ZRE0008FF_L8.3mm_W3.8mm | F1, F2 |
| 2 | SRD-12VDC-SL-C | Relay_SPDT_Hongfa_HF3F-L-xx-1ZL1T | K1, K2 |
Discharge Circuit Final design files
The KiCad project lives in the MADHURAMAN-afk/FSAE-TEAM-URJA-25-LV-circuits-and-documents repository on GitHub; these links point at the commit this page was built from.
Discharge Circuit Final: common questions
How big is the Discharge Circuit Final PCB?
The Discharge Circuit Final measures 74.1 × 64.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Discharge Circuit Final?
10 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Discharge Circuit Final design files?
From the MADHURAMAN-afk/FSAE-TEAM-URJA-25-LV-circuits-and-documents repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Discharge Circuit Final design in my own project?
The repository has no license, so all rights stay with MADHURAMAN-afk. Use it as a reference, and ask the author before reusing the design.
More boards in FSAE-TEAM-URJA-25-LV-circuits-and-documents
Precharge Circuit Final
145 × 65 mm72 parts2LNo license0
SDC
114.2 × 100.2 mm63 parts2LNo license0
BSPD
82.5 × 71.5 mm63 parts2LNo license0
Dashboard
78.5 × 70 mm49 parts2LNo license0
TSAL
145 × 65 mm46 parts2LNo license0
Charger SDC
98.6 × 60 mm44 parts2LNo license0
STM32VCU Version1
138 × 142.5 mm40 parts2LNo license0
AIL
145 × 65 mm36 parts2LNo license0
APPS
77 × 62.8 mm33 parts2LNo license0
CT() 1V) (0 3.5V)to5V
45 × 30.5 mm12 parts2LNo license0
Dissscharhgeeee
65 × 65 mm6 parts2LNo license0