CT() 1V) (0 3.5V)to5V
About the CT() 1V) (0 3.5V)to5V PCB
CT() 1V) (0 3.5V)to5V is an open source PCB design by MADHURAMAN-afk, published on GitHub. It is a 2-layer board measuring 45 × 30.5 mm, with 12 components from 12 distinct parts.
Other key parts include the LM358AN_OBSOLETE, NE555D and 4N35. By type, the board carries 4 resistors, 3 ICs, 3 connectors and 2 capacitors.
Main components on the CT() 1V) (0 3.5V)to5V
CT() 1V) (0 3.5V)to5V bill of materials (BOM)
12 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM358AN_OBSOLETE ICL7660 | DIP-8_W7.62mm_Socket_LongPads | U1 |
| 1 | NE555D LM741 | DIP794W45P254L959H508Q8 | U2 |
| 1 | 4N35 LM741 | DIP794W45P254L959H508Q8 | U3 |
| 1 | CONN_01X02_PIN CT_O/P | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | CONN_01X02_PIN O/P jumper | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | power | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | 10NF 10uf | CP_Radial_D4.0mm_P1.50mm | C1 |
| 1 | 10UF 10uf | CP_Radial_D4.0mm_P1.50mm | C2 |
| 1 | 10K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 40k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 272K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 4k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
CT() 1V) (0 3.5V)to5V design files
The KiCad project lives in the MADHURAMAN-afk/FSAE-TEAM-URJA-25-LV-circuits-and-documents repository on GitHub; these links point at the commit this page was built from.
CT() 1V) (0 3.5V)to5V: common questions
How big is the CT() 1V) (0 3.5V)to5V PCB?
The CT() 1V) (0 3.5V)to5V measures 45 × 30.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CT() 1V) (0 3.5V)to5V?
12 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CT() 1V) (0 3.5V)to5V design files?
From the MADHURAMAN-afk/FSAE-TEAM-URJA-25-LV-circuits-and-documents repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the CT() 1V) (0 3.5V)to5V design in my own project?
The repository has no license, so all rights stay with MADHURAMAN-afk. Use it as a reference, and ask the author before reusing the design.
More boards in FSAE-TEAM-URJA-25-LV-circuits-and-documents
Precharge Circuit Final
145 × 65 mm72 parts2LNo license0
SDC
114.2 × 100.2 mm63 parts2LNo license0
BSPD
82.5 × 71.5 mm63 parts2LNo license0
Dashboard
78.5 × 70 mm49 parts2LNo license0
TSAL
145 × 65 mm46 parts2LNo license0
Charger SDC
98.6 × 60 mm44 parts2LNo license0
STM32VCU Version1
138 × 142.5 mm40 parts2LNo license0
AIL
145 × 65 mm36 parts2LNo license0
APPS
77 × 62.8 mm33 parts2LNo license0
Discharge Circuit Final
74.1 × 64.6 mm10 parts2LNo license0
Dissscharhgeeee
65 × 65 mm6 parts2LNo license0