HardLabs

VCU Version1

MADHURAMAN-afk·FSAE-TEAM-URJA-25-LV-circuits-and-documents·CKT V2/VCU/VCU_Version1.kicad_pcb

VCU Version1 PCB layout, top view — open source STM32 board by MADHURAMAN-afk

About the VCU Version1 PCB

VCU Version1 is an open source STM32 PCB design by MADHURAMAN-afk, published on GitHub. It is a 2-layer board measuring 138 × 142.5 mm, with 40 components from 22 distinct parts.

Its main chip is the ST_NUCLEO-F410RB, from the STM32 family. Other key parts include the TLV76133DCY and LM741. By type, the board carries 14 connectors, 8 capacitors, 7 ICs, 3 fuses, 3 diodes and 3 resistors.

Main components on the VCU Version1

TLV76133DCYLM741

VCU Version1 bill of materials (BOM)

40 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
~
U1
1
TLV76133DCY
U2
1
~
U3
1
~
U4
1
~
U5
2
LM741
U6, U7
2
CONN_01X03_PIN
Conn_01x03_Pin
J1, J16
2
CONN_01X02_PIN
Conn_01x02_Pin
J2, J12
3
SCREW_TERMINAL_01X02
Screw_Terminal_01x02
J3, J17, J20
4
CONN_01X02_PIN
Conn_01x02_Pin
J4, J9, J15, J19
2
CONN_01X04_PIN
Conn_01x04_Pin
J5, J11
1
Analog Voltage Bypass
J18
2
R
10k, 27k
3
Polyfuse
F1, F2, F3
3
D
D1, D2, D3
2
10UF
10uf
C1, C3
1
C
C2
1
10UF
10uf
C4
2
0.1UF
C
C5, C6
2
0.1UF
C
C7, C8
Show 2 more
QtyPartRefs
2
4.7K
R1, R2
1
R220
R220

VCU Version1 design files

The KiCad project lives in the MADHURAMAN-afk/FSAE-TEAM-URJA-25-LV-circuits-and-documents repository on GitHub; these links point at the commit this page was built from.

VCU Version1: common questions

What microcontroller does the VCU Version1 use?

The VCU Version1 is built around the ST_NUCLEO-F410RB, from the STM32 family.

How big is the VCU Version1 PCB?

The VCU Version1 measures 138 × 142.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the VCU Version1?

40 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the VCU Version1 design files?

From the MADHURAMAN-afk/FSAE-TEAM-URJA-25-LV-circuits-and-documents repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the VCU Version1 design in my own project?

The repository has no license, so all rights stay with MADHURAMAN-afk. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the VCU Version1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in FSAE-TEAM-URJA-25-LV-circuits-and-documents

Similar boards