Mts clk

mahdi-kh1265·mts-electronics·mts-clk/mts-clk.kicad_pcb

Mts clk PCB layout, top view — open source board by mahdi-kh1265

About the Mts clk PCB

Mts clk is an open source PCB design by mahdi-kh1265, published on GitHub under the MIT license. It is a 4-layer board measuring 60.2 × 77.5 mm, with 71 components from 34 distinct parts.

Other key parts include the SCPHS-13.6+, TCP-2-10X, LTC6433BIUF-15-TRPBF and OPA197xD. By type, the board carries 34 capacitors, 19 resistors, 5 ICs, 5 connectors, 4 test points and 4 inductors.

It belongs with the test & measurement designs in this gallery.

From the project

Analog RF, photodetector, and demodulation electronics for POSM's modulation-transfer spectroscopy (MTS) laser-locking system.

Analog RF, photodetector, and demodulation electronics for POSM's modulation-transfer spectroscopy (MTS) laser-locking system.

This repository contains two custom PCBs:

1. mts-clk — 10 MHz RF distribution and phase-control board for the EOM drive and MTS demodulation local oscillator. 2. mts-demod — photodiode front end, RF conditioning, analog mixer demodulation, and baseband error-signal generation.

Main components on the Mts clk

SCPHS-13.6+TCP-2-10XLTC6433BIUF-15-TRPBFOPA197xD

Mts clk bill of materials (BOM)

71 components, 34 distinct parts.

QtyPartRefs
1
SCPHS-13.6+
IC1
1
TCP-2-10X
U1
2
LTC6433BIUF-15-TRPBF
U2, U3
1
OPA197xD
U4
1
Input (SMA)
J1
2
Output (SMA)
J2, J3
1
Power Conn.
J4
1
S2B-PH-K-SLFSN
J5
2
TDIODE TP
TP1, TP2
1
CONTROL TP
TP3
1
PWM TP
TP4
2
470u
L1, L3
2
240n
L2, L4
2
1.5p
C1, C2
13
1u
C3, C6, C7, C8, C11, C13, C15, C16 +5
6
1n
C4, C5, C9, C14, C19, C20
4
0.1u
C10, C22, C29, C30
2
10u
C12, C24
3
0.1u
C25, C27, C28
1
22u
C31
Show 14 more
QtyPartRefs
2
1u
C32, C34
1
4.7u
C33
1
100
R1
2
348
R2, R5
2
250
R3, R6
2
280
R4, R7
2
83.5
R8, R10
1
93.1
R9
1
100k
R11
3
10k
R12, R13, R14
1
26.1k
R15
1
10
R16
2
150
R17, R19
1
37.4
R18

Mts clk design files

The KiCad project lives in the mahdi-kh1265/mts-electronics repository on GitHub; these links point at the commit this page was built from.

Mts clk: common questions

How big is the Mts clk PCB?

The Mts clk measures 60.2 × 77.5 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Mts clk?

71 components, from 34 distinct parts. The full bill of materials is listed on this page.

Where can I download the Mts clk design files?

From the mahdi-kh1265/mts-electronics repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Mts clk design in my own project?

Yes, under the terms of its MIT license, which mahdi-kh1265 chose for the repository.

More boards in mts-electronics

Similar boards