5 open source boards using the OPA197xD

Real designs built with the OPA197xD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the OPA197xD

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the OPA197xD connects to, and the resistors, capacitors and other passives placed on it.

  • The - pin has a series resistor on 5 of 5 designs, most often 10 kΩ (then 15 kΩ).
  • Pin 6 has a series resistor on 4 of 5 designs, most often 10 kΩ (then 33 Ω).
  • The V+ pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 µF).
  • The V- pin is tied to GND on 4 of 5 designs.
NCpin 1, 5, 8Connected to: Not connected 100%
-pin 2Connected to: Signal 100%
  • Series resistor on 100% · 10 kΩ (4), 15 kΩ (1), 0 Ω (1)
  • Resistor to GND on 40% · 10 kΩ (2)
+pin 3Connected to: Signal 100%
  • Series resistor on 60% · 10 kΩ (3), 33 Ω (1)
  • Resistor to GND on 40% · 10 kΩ (1), 1 kΩ (1)
  • Capacitor to GND on 40% · 5 pF (1), 100 nF (1)
V-pin 4Connected to: GND 80% · -12V 20%
Pin 6Connected to: A connector 40%
  • Series resistor on 80% · 10 kΩ (2), 33 Ω (1), 1.3 kΩ (1)
V+pin 7Connected to: 12V 100%
  • Decoupling capacitor on 80% · 100 nF (4), 10 µF (1), 10 nF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Arithmetic by bodokaiser, Universal interface adapter by 411568, Gpsdo by AndreasArendt and DA Sensorbox by Lelk0e.

The OPA197xD in open source designs

The gallery holds 5 open source boards using the OPA197xD from 5 GitHub repositories; a typical one measures about 70 × 71.3 mm and carries around 71 components.

60% use four copper layers or more, and 40% carry an open source license.

The most starred is Arithmetic by bodokaiser.

Microcontrollers on boards using the OPA197xD

What boards using the OPA197xD are built for

OPA197xD: common questions

Where can I find a OPA197xD reference design?

Each of the 5 boards on this page is a real design using the OPA197xD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the OPA197xD - pin?

The - pin has a series resistor on 5 of 5 designs, most often 10 kΩ (then 15 kΩ). Counted from the KiCad layouts of 5 open source designs using the OPA197xD.

What resistor goes on the OPA197xD pin 6?

Pin 6 has a series resistor on 4 of 5 designs, most often 10 kΩ (then 33 Ω). Counted from the KiCad layouts of 5 open source designs using the OPA197xD.

What decoupling capacitors do designs use on the OPA197xD V+ pin?

The V+ pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the OPA197xD.

Which microcontrollers do boards using the OPA197xD use?

Most are built on STM32 (2) and ESP32 (1).

How big is a typical board using the OPA197xD?

The median is 70 × 71.3 mm, and 40% are two-layer designs.

What is the most popular open source board using the OPA197xD?

By GitHub stars, Arithmetic by bodokaiser, with 3 stars.

Can I simulate one of these boards using the OPA197xD before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part