PicoM10 bld
makerprobe·PicoM10·kicad/PicoM10_bld.kicad_pcb
About the PicoM10 bld PCB
PicoM10 bld is an open source PCB design by makerprobe, published on GitHub under the MIT license. It is a 6-layer board measuring 8 × 10 mm, with 24 components from 15 distinct parts.
Other key parts include the MIA-M10Q and NCP160AMX330TBG. By type, the board carries 7 capacitors, 6 diodes, 4 test points, 2 ICs, 2 inductors and 2 resistors.
It belongs with the rf & radio designs in this gallery.
From the project
A pretty small ublox MIA-M10Q based GNSS module
Main components on the PicoM10 bld
PicoM10 bld bill of materials (BOM)
24 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MIA-M10Q | SLGA-53_MIA-M10Q | U1 |
| 1 | NCP160AMX330TBG | UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm | U2 |
| 1 | CONMHF1-SMD-G-T Conn_Coaxial | U.FL_Molex_MCRF_73412-0110_Vertical | J1 |
| 1 | Vin | solderpad_castellated_2x2mm | TP1 |
| 1 | Gnd | solderpad_castellated_2x2mm | TP2 |
| 1 | Tx_out | solderpad_castellated_2x2mm | TP3 |
| 1 | Rx_in | solderpad_castellated_2x2mm | TP4 |
| 1 | D_Schottky | D_SOD-923 | D1 |
| 1 | LED | LED_0201_0603Metric_mod | D2 |
| 4 | PESD3V3Z1BSF | Nexperia_DSN0603-2_0.6x0.3mm_P0.4mm | D3, D4, D5, D6 |
| 2 | TBD | C_0201_0603Metric_mod | L1, L2 |
| 5 | GRM155R61A106ME1D 10uF | C_0402_1005Metric | C1, C2, C3, C4, C5 |
| 1 | T520A107M06ATE045 100uF | CP_EIA-3216-10_Kemet-I | C6 |
| 1 | TBD | C_0201_0603Metric_mod | C7 |
| 2 | 1k | R_0201_0603Metric_mod | R1, R2 |
PicoM10 bld design files
The KiCad project lives in the makerprobe/PicoM10 repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/PicoM10_bld.kicad_pcb
- Schematickicad/PicoM10_bld.kicad_sch
PicoM10 bld: common questions
How big is the PicoM10 bld PCB?
The PicoM10 bld measures 8 × 10 mm, has 6 copper layers and is 0.8046 mm thick.
How many components are on the PicoM10 bld?
24 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the PicoM10 bld design files?
From the makerprobe/PicoM10 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PicoM10 bld design in my own project?
Yes, under the terms of its MIT license, which makerprobe chose for the repository.
More boards in PicoM10
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568