HardLabs

Glyph isp

MalphasWats·Glyph·glyph-isp/glyph-isp.kicad_pcb

Glyph isp PCB layout, top view — open source AVR/Arduino board by MalphasWats

About the Glyph isp PCB

Glyph isp is an open source AVR/Arduino PCB design by MalphasWats, published on GitHub. It is a 2-layer board measuring 41 × 16 mm, with 17 components from 16 distinct parts.

Its main chip is the ATMEGA1284P-MU, from the AVR/Arduino family. By type, the board carries 5 capacitors, 5 resistors, 3 connectors, 2 diodes, 1 IC and 1 crystal.

It belongs with the displays & leds designs in this gallery.

From the project

Handheld gaming device based on ATMega1284P

Glyph is a handheld gaming device based on the ATMega1284P micro controller.

This repository contains the mechanical components - KiCAD PCB & laser cut case.

ATMega1284P @ 16MHz. 128kB Flash, 16kB SRAM 1.3" monochrome OLED display 8 soft buttons 2 channel sound via piezo speaker * 2 programmable red LEDs

A software library for controlling the hardware and building simple games is available here:

Main components on the Glyph isp

ATMEGA1284P-MU

Glyph isp bill of materials (BOM)

17 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATMEGA1284P-MU
ATmega16U4-MU
U0
1
20MHZ
16MHz
Y1
2
ISP
J0, J1
1
USB-Micro
J2
1
USR_1
LED1
D1
1
USR_2
LED2
D2
1
0.1uF
C0
1
0.1UF
22pF
C1
1
1UF
22pF
C2
1
1UF
1uF
C3
1
1UF
10uF
C4
1
1K
R1
1
LED
R2
1
10M
LED
R3
1
10M
22R
R4
1
290K
22R
R5

Glyph isp design files

The KiCad project lives in the MalphasWats/Glyph repository on GitHub; these links point at the commit this page was built from.

Glyph isp: common questions

What microcontroller does the Glyph isp use?

The Glyph isp is built around the ATMEGA1284P-MU, from the AVR/Arduino family.

How big is the Glyph isp PCB?

The Glyph isp measures 41 × 16 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Glyph isp?

17 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Glyph isp design files?

From the MalphasWats/Glyph repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Glyph isp design in my own project?

The repository has no license, so all rights stay with MalphasWats. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Glyph isp without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Glyph

Similar boards