Load Cell
manal-a7med·Load_Cell_PCB·Load_Cell_HX711/Load_Cell_HX711.kicad_pcb
About the Load Cell PCB
Load Cell is an open source PCB design by manal-a7med, published on GitHub. It is a 2-layer board measuring 53.3 × 25.3 mm, with 14 components from 9 distinct parts.
Other key parts include the HX711 and AMS1117CD-3.3. By type, the board carries 6 capacitors, 2 ICs, 2 connectors, 2 resistors, 1 diode and 1 inductor.
It belongs with the test & measurement designs in this gallery.
From the project
HX711 Load Cell PCB Design using KiCAD 10.0
Manal Ahmed Matheen ELECTRONICS ASSIGNMENT REPORT Automated Food Dispensing System — Load Cell Measurement Subsystem
Task Design Problem Statement Domain Embedded Systems / PCB Design Status Internship Technical Submission Date 31 March 2026
Task 1 — Load Cell Selection and Key Specifications
The load cell is the primary transducer in this food dispensing system. It converts the mechanical force (weight of dispensed food) into an electrical signal. Choosing the right load cell is critical for accuracy, durability, and noise immunity in an industrial or semi-industrial environment.
Main components on the Load Cell
Load Cell bill of materials (BOM)
14 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HX711 | SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | AMS1117CD-3.3 | TO-252-3_TabPin2 | U2 |
| 2 | Conn_01x04 | FanPinHeader_1x04_P2.54mm_Vertical | J1, J2 |
| 1 | PRTR5V0U2X | SOT-143 | D2 |
| 1 | FerriteBead | L_0402_1005Metric | FB1 |
| 2 | 10u | C_1206_3216Metric | C1, C2 |
| 4 | 100n | C_0402_1005Metric | C3, C4, C5, C6 |
| 1 | 10k | R_0402_1005Metric | R1 |
| 1 | 1M | R_0402_1005Metric | R2 |
Load Cell design files
The KiCad project lives in the manal-a7med/Load_Cell_PCB repository on GitHub; these links point at the commit this page was built from.
Load Cell: common questions
How big is the Load Cell PCB?
The Load Cell measures 53.3 × 25.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Load Cell?
14 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Load Cell design files?
From the manal-a7med/Load_Cell_PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Load Cell design in my own project?
The repository has no license, so all rights stay with manal-a7med. Use it as a reference, and ask the author before reusing the design.
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kEleLab v2 Frontpanel a
Chrismettal
88 × 25 mm23 parts2LGPL-3.0528EleLab v2 Bus150
Chrismettal
150 × 50 mm37 parts2LGPL-3.0528EleLab v2 PowerFeed
Chrismettal
68 × 50 mm11 parts2LGPL-3.0528