HardLabs

ArcadeTrackballMouse

ManiacalLabs·ArcadeTrackballMouse·PCB/ArcadeTrackballMouse.kicad_pcb

ArcadeTrackballMouse PCB layout, top view — open source NXP board by ManiacalLabs

About the ArcadeTrackballMouse PCB

ArcadeTrackballMouse is an open source NXP PCB design by ManiacalLabs, published on GitHub. It is a 2-layer board measuring 40.5 × 68 mm, with 12 components from 3 distinct parts.

Its main chip is the Teensy3.2, from the NXP family. By type, the board carries 11 connectors and 1 IC.

From the project

A completely unnecessary, but fun computer mouse using arcade components and a billiard ball.

A completely unnecessary, but fun computer mouse using arcade components and a billiard ball.

All printed parts were designed in Fusion 360 and can be viewed and downloaded here: https://a360.co/2Rxvm0l Or find the STL files in the Fab folder.

- Happ/Atari Trackball - 24mm Buttons - Quick Connect Button Wires - #10-24 2-1/4" bolt - #10-24 Nut - Teensy 3.2 - PCB @ OSHPark (Or see PCB folder and KiCAD files)

Main components on the ArcadeTrackballMouse

Teensy3.2

ArcadeTrackballMouse bill of materials (BOM)

12 components, 3 distinct parts.

QtyPartRefs
1
Teensy3.2
U1
10
Conn_01x02
J1, J2, J3, J4, J5, J6, J7, J8 +2
1
Trackball
J11

ArcadeTrackballMouse design files

The KiCad project lives in the ManiacalLabs/ArcadeTrackballMouse repository on GitHub; these links point at the commit this page was built from.

ArcadeTrackballMouse: common questions

What microcontroller does the ArcadeTrackballMouse use?

The ArcadeTrackballMouse is built around the Teensy3.2, from the NXP family.

How big is the ArcadeTrackballMouse PCB?

The ArcadeTrackballMouse measures 40.5 × 68 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ArcadeTrackballMouse?

12 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the ArcadeTrackballMouse design files?

From the ManiacalLabs/ArcadeTrackballMouse repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the ArcadeTrackballMouse design in my own project?

The repository has no license, so all rights stay with ManiacalLabs. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ArcadeTrackballMouse without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

Similar boards