DC-Voltage-Sensor-

Manideep136·DC-Voltage-Sensor-·Dc Voltage Sensor/Dc Voltage Sensor.kicad_pcb

DC-Voltage-Sensor- PCB layout, top view — open source board by Manideep136

About the DC-Voltage-Sensor- PCB

DC-Voltage-Sensor- is an open source PCB design by Manideep136, published on GitHub. It is a 2-layer board measuring 36.1 × 26.2 mm, with 8 components from 8 distinct parts.

By type, the board carries 4 resistors, 2 connectors, 1 transistor and 1 capacitor.

It belongs with the sensors and test & measurement designs in this gallery.

From the project

This project focuses on designing a High DC Voltage Sensor PCB using KiCad. The circuit is intended to measure a DC voltage higher than the input range of a microcontroller or measurement device by scaling the voltage to a suitable level.

This project focuses on designing a High DC Voltage Sensor PCB using KiCad. The circuit is intended to measure a DC voltage higher than the input range of a microcontroller or measurement device by scaling the voltage to a suitable level.

A resistor voltage divider is a common method for reducing a high DC voltage to a lower proportional voltage. The scaled output can then be measured using a suitable analog-to-digital converter (ADC), microcontroller, or measurement instrument.

DC-Voltage-Sensor- bill of materials (BOM)

8 components, 8 distinct parts.

QtyPartRefs
1
IRF9540N
Q1
1
Conn_01x02_Pin
J1
1
Conn_01x03_Pin
J2
1
0.1uf
C1
1
22k
R1
1
2k
R2
1
10K
R3
1
100R
R4

DC-Voltage-Sensor- design files

The KiCad project lives in the Manideep136/DC-Voltage-Sensor- repository on GitHub; these links point at the commit this page was built from.

DC-Voltage-Sensor-: common questions

How big is the DC-Voltage-Sensor- PCB?

The DC-Voltage-Sensor- measures 36.1 × 26.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DC-Voltage-Sensor-?

8 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the DC-Voltage-Sensor- design files?

From the Manideep136/DC-Voltage-Sensor- repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the DC-Voltage-Sensor- design in my own project?

The repository has no license, so all rights stay with Manideep136. Use it as a reference, and ask the author before reusing the design.

Similar boards