Xiao-Theremin
manula5454·Xiao-Theremin·Theramin_kicad/Theramin_kicad.kicad_pcb
About the Xiao-Theremin PCB
Xiao-Theremin is an open source RP2040/RP2350 PCB design by manula5454, published on GitHub. It is a 2-layer board measuring 85.5 × 60 mm, with 10 components from 8 distinct parts.
Its main chip is the XIAO-RP2040-SMD, from the RP2040/RP2350 family. By type, the board carries 3 resistors, 2 antennas, 1 IC, 1 connector and 1 capacitor.
It belongs with the audio, rf & radio and test & measurement designs in this gallery.
From the project
A theremin is a musical instrument that measures the difference between two volume and pitch antennas. My version skips the complicated oscillator circuits and amplifier circuits by letting the XIAO RP2040 do all the heavy lifting.
This project was made with a XIAO RP2040 to mitigate JFET's and oscillators by letting the Seeed microcontroller handle the workload
(The schematic might be changed in the future) - The antennas will be just copper wire to create capacitance as my hand moves - The potentiometers allow me to physically tweak the sound of the project - The Audio Jack allows me to hear the sound through my stereo speakers.

Main components on the Xiao-Theremin
Xiao-Theremin bill of materials (BOM)
10 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-RP2040-SMD | XIAO-RP2040-SMD | U1 |
| 1 | AudioJack3 | Jack_3.5mm_CUI_SJ1-3523N_Horizontal | J2 |
| 1 | Pitch | PinSocket_1x01_P2.54mm_Vertical | AE1 |
| 1 | Volume | PinSocket_1x01_P2.54mm_Vertical | AE2 |
| 2 | R_Potentiometer | Potentiometer_Alps_RK09K_Single_Vertical | RV1, RV2 |
| 1 | 10uF | CP_Radial_D5.0mm_P2.00mm | C1 |
| 2 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 1 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
Xiao-Theremin design files
The KiCad project lives in the manula5454/Xiao-Theremin repository on GitHub; these links point at the commit this page was built from.
Xiao-Theremin: common questions
What microcontroller does the Xiao-Theremin use?
The Xiao-Theremin is built around the XIAO-RP2040-SMD, from the RP2040/RP2350 family.
How big is the Xiao-Theremin PCB?
The Xiao-Theremin measures 85.5 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Xiao-Theremin?
10 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Xiao-Theremin design files?
From the manula5454/Xiao-Theremin repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Xiao-Theremin design in my own project?
The repository has no license, so all rights stay with manula5454. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Xiao-Theremin without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k