LCD adapter
maplerainresearch·MRR_ESPE·adapters/LCD_adapter/LCD_adapter.kicad_pcb
About the LCD adapter PCB
LCD adapter is an open source PCB design by maplerainresearch, published on GitHub under the CERN-OHL-1.2 license. It is a 2-layer board measuring 28 × 49 mm, with 4 components from 4 distinct parts.
It belongs with the displays & leds designs in this gallery.
From the project
MRR ESPE 3D printer control board
This adapter allows the MRR ESPE to use generic LCD12864 controllers (officially the RepRap full graphics smart controller).
To do so, connect EXP3BRD to the LCD connector on the MRR ESPE. Then, connect EXP1 and EXP2 on the adapter to EXP1 and EXP2 on the controller. (Optional: Connect D5, D6, D7 to unused native ESP32 pins on the MRR ESPE, like IO2, IO4, and IO15. Then define LCDPINSD5, LCDPINSD6, and LCDPINSD7 in pinsMRRESPE.h`. The KILL pin is also optional.)
LCD adapter bill of materials (BOM)
4 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C144394 EXP1 JST Sales America | IDC-Header_2x05_P2.54mm_Vertical | J2 |
| 1 | C89120 EXP2 Phoenix Contact | IDC-Header_2x05_P2.54mm_Vertical | J3 |
| 1 | C144394 EXP3_BRD JST Sales America | IDC-Header_2x05_P2.54mm_Vertical | J5 |
| 1 | C144394 Conn_02x05_Odd_Even JST Sales America | PinHeader_2x05_P2.54mm_Vertical | J6 |
LCD adapter design files
The KiCad project lives in the maplerainresearch/MRR_ESPE repository on GitHub; these links point at the commit this page was built from.
LCD adapter: common questions
How big is the LCD adapter PCB?
The LCD adapter measures 28 × 49 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LCD adapter?
4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LCD adapter design files?
From the maplerainresearch/MRR_ESPE repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the LCD adapter design in my own project?
Yes, under the terms of its CERN-OHL-1.2 license, which maplerainresearch chose for the repository.
More boards in MRR_ESPE
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k