Rover arm hardware

maramirok·Rover-arm-hardware·hardware/2025_rover_CAN_board.kicad_pcb

Rover arm hardware PCB layout, top view — open source STM32 board by maramirok

About the Rover arm hardware PCB

Rover arm hardware is an open source STM32 PCB design by maramirok, published on GitHub. It is a 4-layer board measuring 98 × 53 mm, with 63 components from 28 distinct parts.

Its main chip is the STM32G030C8T6TR, from the STM32 family. Other key parts include the TPD4E05U06DQAR, MCP25625, TLV75533PDBVR and TLVM23615RDNR. By type, the board carries 21 capacitors, 21 resistors, 8 ICs, 7 connectors, 2 crystals and 2 LEDs.

From the project

Custom motor control PCB for the Space Concordia Mars rover robotic arm, designed in KiCad.

Custom motor control PCB for the Space Concordia Mars rover robotic arm, designed in KiCad.

The board drives five independent DC motors on the rover arm, receives commands over CAN from the main rover controller, and provides regulated power rails for the MCU and peripherals.

- MCU: STM32G030C8T6 - CAN controller/transceiver: MCP25625 (SPI interface) - Motor outputs: 5 independent channels with PWM speed control and direction signals - Power input: 16V DC - Regulation: Buck converter + LDO (MCU/logic supply)

Main components on the Rover arm hardware

TPD4E05U06DQARMCP25625TLV75533PDBVRTLVM23615RDNRSTM32G030C8T6TR

Rover arm hardware bill of materials (BOM)

63 components, 28 distinct parts.

QtyPartRefs
4
TPD4E05U06DQAR
U1, U2, U4, U6
1
MCP25625
U3
1
TLV75533PDBVR
U5
1
TLVM23615RDNR
U7
1
STM32G030C8T6TR
U13
2
XTAL3225
Y1, Y2
5
Conn_01x03
J1, J2, J3, J6, J7
1
EDIF-4
J4
1
MTJ-88ARX1-FSM-LG
J5
1
SW_Push
SW1
2
LED0603
LD1, LD2
1
ESD2CAN24DBZRQ1
D1
4
1 uF
C1, C10, C12, C14
3
4.7 uF
C2, C7, C16
6
0.1 uF
C3, C11, C13, C15, C17, C18
2
22 uF
C4, C5
1
1 uF
C6
2
22 pF
C8, C9
2
12 pF
C19, C20
1
0.1 uF
C21
Show 8 more
QtyPartRefs
1
40.2 KΩ
R1
1
10KΩ
R2
2
0 Ohms
R3, R4
1
R0805
R5
1
10 kΩ
R6
12
10 kΩ
R7, R8, R9, R10, R11, R12, R13, R14 +4
1
68KΩ
R18
2
10k
R20, R21

Rover arm hardware design files

The KiCad project lives in the maramirok/Rover-arm-hardware repository on GitHub; these links point at the commit this page was built from.

Rover arm hardware: common questions

What microcontroller does the Rover arm hardware use?

The Rover arm hardware is built around the STM32G030C8T6TR, from the STM32 family.

How big is the Rover arm hardware PCB?

The Rover arm hardware measures 98 × 53 mm, has 4 copper layers and is 1.1412 mm thick.

How many components are on the Rover arm hardware?

63 components, from 28 distinct parts. The full bill of materials is listed on this page.

Where can I download the Rover arm hardware design files?

From the maramirok/Rover-arm-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Rover arm hardware design in my own project?

The repository has no license, so all rights stay with maramirok. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Rover arm hardware without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards