03013-001
About the 03013-001 PCB
03013-001 is an open source AVR/Arduino PCB design by marian-scientific, published on GitHub. It is a 2-layer board measuring 58 × 50 mm, with 22 components from 11 distinct parts.
Its main chip is the ATtiny85-20P, from the AVR/Arduino family. Other key parts include the LM7805_TO220. By type, the board carries 6 connectors, 6 resistors, 4 capacitors, 2 ICs, 2 transistors and 2 diodes.
From the project
project data, records & publications
Main components on the 03013-001
03013-001 bill of materials (BOM)
22 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM7805_TO220 | TO-220-3_Vertical | U1 |
| 1 | ATtiny85-20P | DIP-8_W7.62mm | U2 |
| 2 | AO3400A | SOT-23 | Q1, Q2 |
| 5 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1, J2, J3, J4, J5 |
| 1 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J6 |
| 2 | SS14 | D_SMA | D1, D2 |
| 1 | 330nF | C_1206_3216Metric | C1 |
| 2 | 100nF | C_1206_3216Metric | C2, C3 |
| 1 | 10uF | CP_Radial_D5.0mm_P2.50mm | C4 |
| 2 | 220 | R_1206_3216Metric | R1, R3 |
| 4 | 10k | R_1206_3216Metric | R2, R4, R5, R6 |
03013-001 design files
The KiCad project lives in the marian-scientific/projects repository on GitHub; these links point at the commit this page was built from.
03013-001: common questions
What microcontroller does the 03013-001 use?
The 03013-001 is built around the ATtiny85-20P, from the AVR/Arduino family.
How big is the 03013-001 PCB?
The 03013-001 measures 58 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 03013-001?
22 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the 03013-001 design files?
From the marian-scientific/projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 03013-001 design in my own project?
The repository has no license, so all rights stay with marian-scientific. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 03013-001 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in projects
02005-001
69 × 109 mm86 parts2LNo license0
AVR/Arduino03010-002
208.2 × 95.3 mm47 parts2LNo license0
03011-006
65 × 30 mm22 parts2LNo license0
02005-002
32 × 42 mm13 parts2LNo license0
03012-001
32 × 38 mm12 parts2LNo license0
42001-001
25 × 25 mm12 parts2LNo license0
00001-008
59 × 66 mm9 parts2LNo license0
AVR/Arduino22001
78.7 × 52.8 mm8 parts2LNo license0
RISC-V02005-005
22 × 27 mm7 parts2LNo license0
02005-003
37 × 34 mm6 parts2LNo license0
RISC-V02005-004
17.5 × 14 mm3 parts2LNo license0
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k