Diy shell.phone
marioguzzzman·diy-shell.phone·hardware/pcb/shellphone_sound_snail.kicad_pcb
About the Diy shell.phone PCB
Diy shell.phone is an open source Raspberry Pi PCB design by marioguzzzman, published on GitHub under the MIT license. It is a 2-layer board measuring 106.5 × 54.4 mm, with 6 components from 4 distinct parts.
Its main chip is the Raspberry_Pi_2_3, from the Raspberry Pi family. By type, the board carries 2 connectors, 2 diodes and 2 resistors.
It belongs with the audio and iot & wireless designs in this gallery.
From the project
Sea Shells, She Tells unfolds as an artistic research project, developing both an artwork, an installation of the Shetells artwork - and a toolkit - the DIY Shell Phone.
This repository is the open-source reference for the DIY Shell Phone, so anyone can build their own.
The DIY Shell Phone is the toolkit of Sea Shells, She Tells, an artistic research project in Esposende. It begins with the simple, almost childlike gesture of holding a shell to the ear and hearing the ocean. Through field recordings, performed voices, local stories and speculative futures, we extend a playful voice to the waters of Esposende, and invite the people who live alongside them to answer.

Diy shell.phone bill of materials (BOM)
6 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Raspberry_Pi_2_3 | PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | MAX98357A | PinSocket_1x07_P2.54mm_Vertical | J2 |
| 2 | LED | LED_D5.0mm | D1, D2 |
| 2 | 470Ω | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
Diy shell.phone design files
The KiCad project lives in the marioguzzzman/diy-shell.phone repository on GitHub; these links point at the commit this page was built from.
Diy shell.phone: common questions
What microcontroller does the Diy shell.phone use?
The Diy shell.phone is built around the Raspberry_Pi_2_3, from the Raspberry Pi family.
How big is the Diy shell.phone PCB?
The Diy shell.phone measures 106.5 × 54.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Diy shell.phone?
6 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Diy shell.phone design files?
From the marioguzzzman/diy-shell.phone repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Diy shell.phone design in my own project?
Yes, under the terms of its MIT license, which marioguzzzman chose for the repository.
Can I test firmware for the Diy shell.phone without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507