HardLabs

PRODIGY-ATMEGA2560

mark69163·prodigy·PRODIGY-ATMEGA2560/PRODIGY-ATMEGA2560.kicad_pcb

PRODIGY-ATMEGA2560 PCB layout, top view — open source AVR/Arduino board by mark69163

About the PRODIGY-ATMEGA2560 PCB

PRODIGY-ATMEGA2560 is an open source AVR/Arduino PCB design by mark69163, published on GitHub. It is a 4-layer board measuring 55 × 40 mm, with 22 components from 11 distinct parts.

Its main chip is the ATMEGA2560-8A, from the AVR/Arduino family. Other key parts include the TXS0108EPW and FT231XQ. By type, the board carries 10 capacitors, 4 resistors, 3 ICs, 2 transistors, 2 connectors and 1 crystal.

Main components on the PRODIGY-ATMEGA2560

ATMEGA2560-8ATXS0108EPWFT231XQ

PRODIGY-ATMEGA2560 bill of materials (BOM)

22 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATMEGA2560-8A
ATmega2560-8A
U1
1
TXS0108EPW
U2
1
FT231XQ
U3
2
BC850
Q1, Q2
1
8MHZ
8MHz
Y1
2
DF40C-100DP-04V-51
J1, J2
2
4.7PF
4.7pF
C1, C2
2
10UF
10uF
C3, C9
6
100NF
100nF
C4, C5, C6, C7, C8, C10
2
0R
R1, R2
2
10K
10k
R3, R4

PRODIGY-ATMEGA2560 design files

The KiCad project lives in the mark69163/prodigy repository on GitHub; these links point at the commit this page was built from.

PRODIGY-ATMEGA2560: common questions

What microcontroller does the PRODIGY-ATMEGA2560 use?

The PRODIGY-ATMEGA2560 is built around the ATMEGA2560-8A, from the AVR/Arduino family.

How big is the PRODIGY-ATMEGA2560 PCB?

The PRODIGY-ATMEGA2560 measures 55 × 40 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the PRODIGY-ATMEGA2560?

22 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PRODIGY-ATMEGA2560 design files?

From the mark69163/prodigy repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the PRODIGY-ATMEGA2560 design in my own project?

The repository has no license, so all rights stay with mark69163. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PRODIGY-ATMEGA2560 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in prodigy

Similar boards