Countdown timer
MartinCowen·countdown-timer-hardware·timer_pcb/countdown_timer.kicad_pcb
About the Countdown timer PCB
Countdown timer is an open source STM32 PCB design by MartinCowen, published on GitHub under the MIT license. It is a 2-layer board measuring 165 × 135 mm, with 105 components from 25 distinct parts.
Its main chip is the STM32C031C6Tx, from the STM32 family. Other key parts include the ULN2003 and TLV76133DCY. By type, the board carries 48 resistors, 14 diodes, 14 capacitors, 9 switches, 8 transistors and 5 ICs.
From the project
Child-friendly Countdown Timer: KiCad projects for PCB and Front Panel
Main components on the Countdown timer
Countdown timer bill of materials (BOM)
105 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32C031C6Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 3 | ULN2003 | SOIC-16_3.9x9.9mm_P1.27mm | U2, U3, U4 |
| 1 | TLV76133DCY | SOT-223-3_TabPin2 | U5 |
| 4 | BCP51 | SOT-223-3_TabPin2 | Q1, Q2, Q3, Q4 |
| 4 | BC847 | SOT-323_SC-70 | Q5, Q6, Q7, Q8 |
| 1 | Conn_ARM_JTAG_SWD_10 | PinHeader_2x05_P1.27mm_Vertical_SMD | J1 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10118194-0001LF_Horizontal | J2 |
| 4 | SA08-11SURKWA | SA08-11SURKWA | DS1, DS2, DS3, DS4 |
| 1 | Speaker | CMS-151504-SMT-TR | LS1 |
| 7 | D6R00 F1 LFS | CK_D6 | SW1, SW2, SW3, SW4, SW5, SW6, SW7 |
| 1 | D6R40 F1 LFS | CK_D6 | SW8 |
| 1 | SW_DIP_x08 | DIP-16_W7.62mm | SW9 |
| 10 | LED | LED_D5.0mm_FlatTop | D1, D2, D3, D4, D5, D6, D7, D8 +2 |
| 4 | BAT54A | SOT-323_SC-70 | D19, D20, D21, D22 |
| 5 | 4u7 | CP_Elec_4x5.4 | C1, C2, C3, C4, C9 |
| 7 | 100n | C_0805_2012Metric | C5, C6, C7, C8, C12, C13, C14 |
| 2 | 1u | C_0805_2012Metric | C10, C11 |
| 17 | 47k | R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8 +9 |
| 7 | 47 | R_0805_2012Metric | R17, R18, R19, R20, R21, R22, R23 |
| 4 | 1k | R_0805_2012Metric | R24, R25, R26, R27 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 220 | R_0805_2012Metric | R28, R29 |
| 8 | 62 | R_0805_2012Metric | R30, R31, R32, R33, R34, R35, R36, R37 |
| 8 | 10k | R_0805_2012Metric | R39, R42, R43, R44, R45, R46, R47, R48 |
| 1 | 0 | R_0805_2012Metric | R41 |
| 1 | 120 | R_0805_2012Metric | R49 |
Countdown timer design files
The KiCad project lives in the MartinCowen/countdown-timer-hardware repository on GitHub; these links point at the commit this page was built from.
Countdown timer: common questions
What microcontroller does the Countdown timer use?
The Countdown timer is built around the STM32C031C6Tx, from the STM32 family.
How big is the Countdown timer PCB?
The Countdown timer measures 165 × 135 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Countdown timer?
105 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the Countdown timer design files?
From the MartinCowen/countdown-timer-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Countdown timer design in my own project?
Yes, under the terms of its MIT license, which MartinCowen chose for the repository.
Can I test firmware for the Countdown timer without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k