17 open source boards using the TLV76133DCY
Real designs built with the TLV76133DCY, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
MoleNet V7.1
ComNets-Bremen
106 × 66.8 mm70 parts4LGPL-3.013STM32
Ittypda
ingobeans
105 × 107.2 mm152 parts2LNo license2ESP32
Intelligent-Traffic-Simulator
LimesKey
165.5 × 100.5 mm148 parts4LApache-2.01STM32
Gadas MSE Slave Module
Gady159
229.2 × 100.8 mm533 parts6LNo license0RP2040/RP2350
Person keyboard
jtljac
446.9 × 141.7 mm356 parts2LNo license0STM32
Busy toad
giacomo-ascari
180 × 70 mm215 parts4LNo license0STM32
Countdown timer
MartinCowen
165 × 135 mm105 parts2LMIT0STM32
RJX-Embedded-Training-Kit
MUDAL
69.7 × 70.9 mm103 parts2LGPL-3.00Measurement Board
marionas01
88 × 57 mm87 parts4LNo license0STM32
Black magic
GKevinLi
50.9 × 43.8 mm70 parts4LNo license0ESP32
Voice-Assistance-MoleNet
ComNets-Bremen
106 × 66.8 mm65 parts4LMIT0ESP32
Babys first
GKevinLi
54 × 34 mm35 parts2LNo license0ESP32
Esp32-drone flight controller
mohammedtalha15
54 × 34 mm35 parts2LNo license0- schematic only · 57 partsSTM32
DIY-HOTAS
jtljac
57 parts2LNo license0 Control Board
marionas01
87 × 105 mm84 parts4LNo license0Gadas MSE Master Backplane
Gady159
300 × 120 mm79 parts2LNo license0STM32
VCU Version1
MADHURAMAN-afk
138 × 142.5 mm40 parts2LNo license0
How designs wire the TLV76133DCY
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the TLV76133DCY connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 12 of 14 designs, most often 1 µF (then 10 µF).
- The VO pin has a decoupling capacitor on 9 of 14 designs, most often 100 nF (then 2.2 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VOpin 2 | Connected to: 3.3V 64% · a signal 36% |
|
| VIpin 3 | Connected to: 5V 71% · a signal 29% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MoleNet V7.1 by ComNets-Bremen, Ittypda by ingobeans, Intelligent-Traffic-Simulator by LimesKey and Voice-Assistance-MoleNet by ComNets-Bremen.
The TLV76133DCY in open source designs
The gallery holds 17 open source boards using the TLV76133DCY from 15 GitHub repositories; a typical one measures about 105.9 × 85.7 mm and carries around 84 components.
53% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is MoleNet V7.1 by ComNets-Bremen.
Parts used alongside the TLV76133DCY
Microcontrollers on boards using the TLV76133DCY
What boards using the TLV76133DCY are built for
TLV76133DCY: common questions
Where can I find a TLV76133DCY reference design?
Each of the 17 boards on this page is a real design using the TLV76133DCY. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TLV76133DCY VI pin?
The VI pin has a decoupling capacitor on 12 of 14 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 14 open source designs using the TLV76133DCY.
What decoupling capacitors do designs use on the TLV76133DCY VO pin?
The VO pin has a decoupling capacitor on 9 of 14 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 14 open source designs using the TLV76133DCY.
What parts are used alongside the TLV76133DCY?
The ESP32-S3-WROOM-1, TPS82130, USBLC6-2P6, 74AHC1G00 and 74LVC2G241 appear in the most repositories here.
Which microcontrollers do boards using the TLV76133DCY use?
Most are built on STM32 (8), ESP32 (5) and RP2040/RP2350 (1).
How big is a typical board using the TLV76133DCY?
The median is 105.9 × 85.7 mm, and 53% are two-layer designs.
What is the most popular open source board using the TLV76133DCY?
By GitHub stars, MoleNet V7.1 by ComNets-Bremen, with 13 stars.
Can I simulate one of these boards using the TLV76133DCY before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.