58 open source boards using the ULN2003
Real designs built with the ULN2003, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
MPCNC-Nano-Estlcam-Shield
tnn85
160 × 100 mm92 parts2LCustom license70Raspberry Pi
Expansion board
reubenstr
100 × 49.8 mm75 parts4LMIT51Input selector
FutureSharks
90.2 × 52.1 mm41 parts2LGPL-3.045AVR/Arduino
MyGenWashy
mayermakes
147.8 × 106.3 mm54 parts2LGPL-3.011Keithley1950
openscopeproject
60 × 80 mm83 parts2LCERN-OHL-1.29Temp
ka6s
170.2 × 135.1 mm146 parts4LCustom license7STM32
Timer-RTC-STM32-Tm1638
nhantt92
93 × 61 mm125 parts2LNo license6AVR/Arduino
NicoEFI-ECU-Speeduino mega2561
NicoEFI
85 × 100 mm135 parts2LNo license5BluePill-Monster-Arcade-Board withbuttons
steelpuxnastik
91.7 × 65.8 mm18 parts2LNo license4JC2 v4.1
Emile666
233.7 × 160 mm120 parts2LNo license3LPF Board HF-6m Forte600
SP6GK
250 × 160 mm129 parts2LGPL-3.02DP1600i
Hocus-Pocus
120.4 × 100.1 mm121 parts2LNo license1ESP32
Reverb
DynamicWhiteHat
82.6 × 74.3 mm102 parts2LNo license1AVR/Arduino
Shield-B
rsedak
69.1 × 53.9 mm44 parts2LCustom license1Breakout
akashihi
100 × 100 mm43 parts4LNo license1NucleoExpansion
JiriS97
156.2 × 143.5 mm41 parts2LMIT1Led matrix-5x4
paliichukvladyslav
96.5 × 96.5 mm30 parts2LWTFPL1STM32
Menelaos rev-4
acastles91
99.5 × 91 mm124 parts4LNo license0AVR/Arduino
The-SuperCap-Bike-Project
Fischer-Andrew
110.5 × 119.5 mm119 parts2LCC0-1.00ESP32
SingleDigitVFDDriver
Electro707
79 × 72 mm106 parts2LGPL-3.00STM32
Countdown timer
MartinCowen
165 × 135 mm105 parts2LMIT0Mobiflight
gehel
66.6 × 104.1 mm88 parts2LNo license0PIC
CAN-Bus-Car-Lights
sergimarsol
126.1 × 134.1 mm80 parts2LMIT0RP2040/RP2350
ALTERNANCIA PI PICO
zen451019
150 × 100 mm71 parts2LNo license0Smarthomepcb2logic
chromyx
196.9 × 171.5 mm69 parts2LNo license0ESP32
Integrated board
Open-2-Photon-Microscope
98.5 × 111 mm65 parts2LCERN-OHL-1.20Floppy overdrive
Emu-gators
163 × 104 mm61 parts2LNo license0STM32
SolenoidDriver
mechaken
84.3 × 50 mm59 parts2LMIT0RISC-V
LAM-MEW-G3
b4ck5p4c3
53 × 80 mm55 parts2LCERN-OHL-S-2.00AVR/Arduino
4-in-1-LED-Matrix-Board
shubham7547
111.8 × 116.8 mm46 parts2LNo license0AVR/Arduino
4-in-1-LED-Matrix-Board main
ansh7458
111.8 × 116.8 mm46 parts2LNo license0ESP32
Esp32-pcb control system
KerimAltuntecim
258.3 × 69.2 mm38 parts2LMIT0AVR/Arduino
ModuleController
dennis9819
68.3 × 90 mm20 parts2LAGPL-3.00- schematic only · 13 partsAVR/Arduino
Plotter
alisha-develops
13 partsNo license0 - schematic only · 4 partsESP32
HWSW1
Deliciozy
4 partsNo license0 - schematic only · 4 partsESP32
HeartRateDial
Deliciozy
4 partsNo license0
How designs wire the ULN2003
Read from the KiCad layouts of 46 open source designs, one per repository: what each pin of the ULN2003 connects to, and the resistors, capacitors and other passives placed on it.
- The COM pin is tied to 5V on 28 of 45 designs (not connected on 5, GND on 2, a signal on 10).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 8 | Connected to: GND 93% | — |
| COMpin 9 | Connected to: 5V 62% · a signal 22% | — |
14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include V0.4.3d by speeduino, ProgrammableRelayModule2Channel by numato, MPCNC-Nano-Estlcam-Shield by tnn85 and Expansion board by reubenstr.
The ULN2003 in open source designs
The gallery holds 58 open source boards using the ULN2003 from 49 GitHub repositories; a typical one measures about 98.5 × 82 mm and carries around 56 components.
91% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is V0.4.3d by speeduino.
Parts used alongside the ULN2003
Microcontrollers on boards using the ULN2003
What boards using the ULN2003 are built for
ULN2003: common questions
Where can I find a ULN2003 reference design?
Each of the 58 boards on this page is a real design using the ULN2003. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ULN2003 COM pin connected?
The COM pin is tied to 5V on 28 of 45 designs (not connected on 5, GND on 2, a signal on 10). Counted from the KiCad layouts of 46 open source designs using the ULN2003.
What parts are used alongside the ULN2003?
The L7805, 74HC595, ESP32-C3-WROOM-02, PC817 and Arduino_Nano_Every appear in the most repositories here.
Which microcontrollers do boards using the ULN2003 use?
Most are built on AVR/Arduino (16), ESP32 (10), STM32 (4) and PIC (3).
How big is a typical board using the ULN2003?
The median is 98.5 × 82 mm, and 91% are two-layer designs.
What is the most popular open source board using the ULN2003?
By GitHub stars, V0.4.3d by speeduino, with 282 stars.
Can I simulate one of these boards using the ULN2003 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.