Simple i2c controller
marvec·pcb·simple-i2c-controller/simple-i2c-controller.kicad_pcb
About the Simple i2c controller PCB
Simple i2c controller is an open source AVR/Arduino PCB design by marvec, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 45.7 × 43.2 mm, with 4 components from 3 distinct parts.
Its main chip is the ARDUINO_NANO, from the AVR/Arduino family. By type, the board carries 2 resistors, 1 IC and 1 capacitor.
From the project
Circuit boards
relay-board - I2C based relay board that can control 8 AC outputs (250V 10A)
Main components on the Simple i2c controller
Simple i2c controller bill of materials (BOM)
4 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ARDUINO_NANO | arduino_nano | U1 |
| 1 | CP1 | C2V10 | C1 |
| 2 | 10k | R3-LARGE_PADS | R1, R2 |
Simple i2c controller design files
The KiCad project lives in the marvec/pcb repository on GitHub; these links point at the commit this page was built from.
Simple i2c controller: common questions
What microcontroller does the Simple i2c controller use?
The Simple i2c controller is built around the ARDUINO_NANO, from the AVR/Arduino family.
How big is the Simple i2c controller PCB?
The Simple i2c controller measures 45.7 × 43.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Simple i2c controller?
4 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Simple i2c controller design files?
From the marvec/pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Simple i2c controller design in my own project?
Yes, under the terms of its Apache-2.0 license, which marvec chose for the repository.
Can I test firmware for the Simple i2c controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in pcb
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k