Dual-Actuator-Wave-Like-Navigator
Mathias-Jensen·Dual-Actuator-Wave-Like-Navigator·design-files/PCB/component_shield.kicad_pcb
About the Dual-Actuator-Wave-Like-Navigator PCB
Dual-Actuator-Wave-Like-Navigator is an open source PCB design by Mathias-Jensen, published on GitHub under the MIT license. It is a 2-layer board measuring 76.5 × 79.5 mm, with 0 components from 0 distinct parts.
It belongs with the iot & wireless, dev boards & breakouts and robotics & motion designs in this gallery.
From the project
This repository contains the hardware control code, data analysis scripts, and supplementary software used for the development of the Dual Actuator Wave-Like Navigator (DAWN) — a soft robotic system that mimics wave-like locomotion.
This repository contains the hardware control code, data analysis scripts, and supplementary software used for the development of the Dual Actuator Wave-Like Navigator (DAWN) — a soft robotic system that mimics wave-like locomotion.
- Arduino-compatible microcontroller with RTOS support - Motor drivers and actuators - Syringe-based pump system - Pressure sensors and signal conditioning - Bluetooth/Wireless modules for command/control
Dual-Actuator-Wave-Like-Navigator design files
The KiCad project lives in the Mathias-Jensen/Dual-Actuator-Wave-Like-Navigator repository on GitHub; these links point at the commit this page was built from.
Dual-Actuator-Wave-Like-Navigator: common questions
How big is the Dual-Actuator-Wave-Like-Navigator PCB?
The Dual-Actuator-Wave-Like-Navigator measures 76.5 × 79.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dual-Actuator-Wave-Like-Navigator?
0 components, from 0 distinct parts. The full bill of materials is listed on this page.
Where can I download the Dual-Actuator-Wave-Like-Navigator design files?
From the Mathias-Jensen/Dual-Actuator-Wave-Like-Navigator repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Dual-Actuator-Wave-Like-Navigator design in my own project?
Yes, under the terms of its MIT license, which Mathias-Jensen chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k