ArtNetLedPixels
About the ArtNetLedPixels PCB
ArtNetLedPixels is an open source NXP PCB design by MathieuMH, published on GitHub under the MIT license. It is a 2-layer board measuring 80.5 × 72.4 mm, with 38 components from 17 distinct parts.
Its main chip is the Teensy3.2_NO_USB, from the NXP family. Other key parts include the WIZ850io, CAT811TTBI-GT3, LM2937xMP and 74HCT245. By type, the board carries 17 resistors, 7 ICs, 7 capacitors, 6 connectors and 1 diode.
Main components on the ArtNetLedPixels
ArtNetLedPixels bill of materials (BOM)
38 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | WIZ850io | WIZ850io | U1 |
| 1 | Teensy3.2_NO_USB | Teensy30_31_32_LC | U2 |
| 1 | CAT811TTBI-GT3 | SOT-143 | U3 |
| 2 | LM2937xMP | SOT-223-3_TabPin2 | U4, U5 |
| 2 | 74HCT245 | SO-20_12.8x7.5mm_Pitch1.27mm | U6, U7 |
| 1 | Conn_01x02_Female | TerminalBlock_Phoenix_MPT-2.54mm_2pol | J1 |
| 1 | Conn_01x04_Female | TerminalBlock_Phoenix_MPT-2.54mm_4pol | J2 |
| 1 | Conn_01x03_Male | TerminalBlock_Phoenix_MPT-2.54mm_3pol | J3 |
| 3 | Conn_01x08_Male | TerminalBlock_Phoenix_MPT-2.54mm_8pol | J4, J5, J6 |
| 1 | LED | LED_1206_HandSoldering | D1 |
| 3 | 100nF | C_0805_HandSoldering | C1, C3, C4 |
| 1 | 1uF | C_0805_HandSoldering | C2 |
| 3 | 10uF | C_0805_HandSoldering | C5, C6, C7 |
| 2 | 10k | R_1206_HandSoldering | R1, R28 |
| 13 | 100R | R_1206_HandSoldering | R2, R3, R4, R5, R6, R7, R8, R9 +5 |
| 1 | 0R | R_1206_HandSoldering | R26 |
| 1 | 120R | R_1206_HandSoldering | R27 |
ArtNetLedPixels design files
The KiCad project lives in the MathieuMH/ArtNetLedPixels repository on GitHub; these links point at the commit this page was built from.
ArtNetLedPixels: common questions
What microcontroller does the ArtNetLedPixels use?
The ArtNetLedPixels is built around the Teensy3.2_NO_USB, from the NXP family.
How big is the ArtNetLedPixels PCB?
The ArtNetLedPixels measures 80.5 × 72.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ArtNetLedPixels?
38 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the ArtNetLedPixels design files?
From the MathieuMH/ArtNetLedPixels repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the ArtNetLedPixels design in my own project?
Yes, under the terms of its MIT license, which MathieuMH chose for the repository.
Can I test firmware for the ArtNetLedPixels without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532
NXPMCL68
31.6 × 84.1 mm13 parts4LNo license532
NXPMCL65+
72.6 × 64.1 mm6 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532