11 open source boards using the LM2937xMP
Real designs built with the LM2937xMP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
ESC v2
22060
50 × 50 mm124 parts4LNo license0STM32
INFERNO
SparrowTheNerd
100 × 75 mm68 parts4LNo license0ESP8266
ECE 445L Baseline Project
wtc534
93.5 × 153.7 mm44 parts2LNo license0ESP8266
ECE 445L Baseline Project
Siddhant779
93.5 × 153.7 mm44 parts2LNo license0NXP
ArtNetLedPixels
MathieuMH
80.5 × 72.4 mm38 parts2LMIT0Microchip SAM
FireLord Device
RatKinng
105.4 × 50.8 mm10 parts2LNo license0STM32
DALI STM32 PSU
lactobacil
47 × 62.4 mm40 parts2LApache-2.06ECE 319K Baseline Project
Siddhant779
114.3 × 88.9 mm40 parts2LNo license0ECE 319K Baseline Project
wtc534
114.3 × 88.9 mm40 parts2LNo license0ESP32
ECE445L Operator Final
Andres-Wearden
128.8 × 114.8 mm56 parts2LNo license0UnfolderBuffer
kefernandez
135 × 92 mm180 parts4LNo license1
How designs wire the LM2937xMP
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the LM2937xMP connects to, and the resistors, capacitors and other passives placed on it.
- The VO pin has a decoupling capacitor on 7 of 9 designs, most often 10 µF (then 4.7 µF).
- The VI pin has a decoupling capacitor on 5 of 9 designs, most often 10 µF (then 22 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VIpin 1 | Connected to: 5V 78% · a signal 22% |
|
| GNDpin 2 | Connected to: GND 78% | — |
| VOpin 3 | Connected to: 5V 67% · a signal 33% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DALI STM32 PSU by lactobacil, UnfolderBuffer by kefernandez, ESC v2 by 22060 and ECE445L Operator Final by Andres-Wearden.
The LM2937xMP in open source designs
The gallery holds 11 open source boards using the LM2937xMP from 9 GitHub repositories; a typical one measures about 100 × 88.9 mm and carries around 44 components.
73% are two-layer designs, the rest use four layers or more, and 18% carry an open source license.
The most starred is DALI STM32 PSU by lactobacil.
Parts used alongside the LM2937xMP
Microcontrollers on boards using the LM2937xMP
What boards using the LM2937xMP are built for
LM2937xMP: common questions
Where can I find a LM2937xMP reference design?
Each of the 11 boards on this page is a real design using the LM2937xMP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LM2937xMP VO pin?
The VO pin has a decoupling capacitor on 7 of 9 designs, most often 10 µF (then 4.7 µF). Counted from the KiCad layouts of 9 open source designs using the LM2937xMP.
What decoupling capacitors do designs use on the LM2937xMP VI pin?
The VI pin has a decoupling capacitor on 5 of 9 designs, most often 10 µF (then 22 µF). Counted from the KiCad layouts of 9 open source designs using the LM2937xMP.
What parts are used alongside the LM2937xMP?
The EK-TM4C123GXL, LM4041CILPR, MCP34119P, ESP8266-01/ESP-01 and ILI_Display appear in the most repositories here.
Which microcontrollers do boards using the LM2937xMP use?
Most are built on STM32 (3), ESP8266 (2), ESP32 (1) and NXP (1).
How big is a typical board using the LM2937xMP?
The median is 100 × 88.9 mm, and 73% are two-layer designs.
What is the most popular open source board using the LM2937xMP?
By GitHub stars, DALI STM32 PSU by lactobacil, with 6 stars.
Can I simulate one of these boards using the LM2937xMP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.