116 open source boards using the 74HCT245
Real designs built with the 74HCT245, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
8bit computer
vascofazza
297.2 × 180.3 mm327 parts2LMIT314Amiga 2000 EATX
jasonsbeer
304.8 × 330.2 mm599 parts4LGPL-3.0199LittleSixteen
SukkoPera
389 × 136.2 mm329 parts2LCustom license76Tipi peb
jedimatt42
237.7 × 146.1 mm47 parts2LGPL-3.076Amiga-N2630
jasonsbeer
318.4 × 124.5 mm231 parts4LNo license69RP2040/RP2350
PicoWiFiModem
mecparts
100 × 66.1 mm33 parts2LGPL-3.064RIPPLE-IDE
LIV2
129.2 × 50 mm48 parts2LGPL-2.041MAXI030
aslak3
239.4 × 165.7 mm197 parts4LGPL-2.038RP2040/RP2350
Mega IIe
baldengineer
163 × 174.4 mm307 parts4LMIT33ESP32
Badge2017
cryptovillage
95.2 × 154.5 mm129 parts2LNo license31PCSuperCombo
JayesonLS
123.3 × 95 mm39 parts2LMIT21Processor
Bread80
410.2 × 272.4 mm417 parts2LNo license19ESP32
Clock
Matir
196.7 × 31.5 mm90 parts2LBSD-2-Clause18NQSAP-PCB Program Counter and Stack Pointer
TomNisbet
102 × 96 mm65 parts2LMIT18RIDE
LIV2
82.3 × 37.2 mm62 parts4LNo license17HD6309 computer
trcwm
133 × 82 mm45 parts2LCERN-OHL-1.217ReSeed
SukkoPera
60.8 × 100 mm55 parts2LNo license15NXP
Controller T41 rev0.3
brianamos1
102.9 × 69.9 mm51 parts2LGPL-3.014STM32
Panel board
ReflexCreations
281 × 195 mm305 parts4LMIT12RP2040/RP2350
Mainboard
mincrmatt12
136.3 × 71.1 mm160 parts4LMIT11ESP32
Pcb
brainsmoke
60 × 50 mm69 parts2LNo license11CIDER
LIV2
74.9 × 57.2 mm68 parts4LGPL-2.011AVR/Arduino
Z80Atmega128
46nori
170 × 130 mm105 parts4LGPL-3.09RC2014 Tandy Sound Card
tebl
99.1 × 49.5 mm32 parts2LGPL-3.09Hannes512
SukkoPera
54.3 × 72.2 mm24 parts2LNo license8ESP32 GRBL SUBD
JochiSt
91 × 67 mm69 parts2LGPL-3.07TI99-4A-internal-TIPI
lucedoriente
100 × 56.5 mm32 parts2LGPL-3.06Rosco ide ata
markrvmurray
83.8 × 113 mm25 parts2LCERN-OHL-1.26Resound-2-MCA-OPL3
texelec
131.1 × 88.3 mm53 parts2LNo license5BITSY Mark I
codesmythe
102 × 102 mm55 parts4LCC-BY-NC-4.046309-Unleashed
FredericSegard
252.7 × 106.7 mm95 parts2LNo license3RP2040/RP2350
LedScreen
Nickdev8
87 × 84 mm39 parts2LMIT2KiCad-GD32F207RG-Pixel-8
vanvught
65.5 × 55 mm29 parts2LMIT2PIC
Busdisplay board
Sirawit7205
33 × 50 mm26 parts2LCERN-OHL-S-2.02Xt isa umb
zyga64
94 × 60.5 mm14 parts2LNo license2TTL 6510 Computer
StefansAI
368.3 × 215.9 mm330 parts2LNo license1
How designs wire the 74HCT245
Read from the KiCad layouts of 75 open source designs, one per repository: what each pin of the 74HCT245 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 50 of 75 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 10 | Connected to: GND 97% | — |
| VCCpin 20 | Connected to: 5V 93% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 8bit computer by vascofazza, Amiga 2000 EATX by jasonsbeer, TIPI by jedimatt42 and LittleSixteen by SukkoPera.
The 74HCT245 in open source designs
The gallery holds 116 open source boards using the 74HCT245 from 76 GitHub repositories; a typical one measures about 102.4 × 99.4 mm and carries around 53 components.
75% are two-layer designs, the rest use four layers or more, and 54% carry an open source license.
The most starred is 8bit computer by vascofazza.
Parts used alongside the 74HCT245
Microcontrollers on boards using the 74HCT245
What boards using the 74HCT245 are built for
74HCT245: common questions
Where can I find a 74HCT245 reference design?
Each of the 116 boards on this page is a real design using the 74HCT245. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HCT245 VCC pin?
The VCC pin has a decoupling capacitor on 50 of 75 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 75 open source designs using the 74HCT245.
What parts are used alongside the 74HCT245?
The 74HCT08, 74HCT138, 74HCT00, 74HCT32 and 74HCT02 appear in the most repositories here.
Which microcontrollers do boards using the 74HCT245 use?
Most are built on RP2040/RP2350 (12), ESP32 (8), AVR/Arduino (4) and Raspberry Pi (4).
How big is a typical board using the 74HCT245?
The median is 102.4 × 99.4 mm, and 75% are two-layer designs.
What is the most popular open source board using the 74HCT245?
By GitHub stars, 8bit computer by vascofazza, with 314 stars.
Can I simulate one of these boards using the 74HCT245 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.