Pulsometer
Matii178·Pulsometer·KiCad_Pulsometer/Pulsometr.kicad_pcb
About the Pulsometer PCB
Pulsometer is an open source PCB design by Matii178, published on GitHub. It is a 2-layer board measuring 63.3 × 40.4 mm, with 31 components from 19 distinct parts.
Other key parts include the TL071 and TLC272. By type, the board carries 17 resistors, 9 capacitors, 3 ICs and 1 jumper.
It belongs with the wearables designs in this gallery.
From the project
The project of pulsometer consists of designing electronic schematic of heart rate monitor, designing PCB board layout and creation of working device.
As mentioned on a front page, here you can find electronic scheme and PCB board design.
Main components on the Pulsometer
Pulsometer bill of materials (BOM)
31 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL071 | SOP-8_3.9x4.9mm_P1.27mm | U1 |
| 2 | TLC272 | SOP-8_3.9x4.9mm_P1.27mm | U2, U3 |
| 1 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | 100k | Potentiometer_Piher_T-16H_Single_Horizontal | RV1 |
| 3 | 10uF | CP_Elec_6.3x5.2 | C1, C2, C9 |
| 3 | 2uF | C_0805_2012Metric | C3, C5, C8 |
| 3 | 1uF | C_0805_2012Metric | C4, C6, C7 |
| 2 | 47kR | R_0805_2012Metric | R1, R2 |
| 1 | 100R | R_0805_2012Metric | R3 |
| 1 | 220kR | R_0805_2012Metric | R4 |
| 2 | 150kR | R_0805_2012Metric | R5, R12 |
| 1 | 75kR | R_0805_2012Metric | R6 |
| 1 | 1,2kR | R_0805_2012Metric | R7 |
| 2 | 30kR | R_0805_2012Metric | R8, R13 |
| 2 | 3.3kR | R_0805_2012Metric | R9, R10 |
| 1 | 1.5kR | R_0805_2012Metric | R11 |
| 1 | 1.2kR | R_0805_2012Metric | R14 |
| 2 | 2kR | R_0805_2012Metric | R15, R16 |
| 1 | 1kR | R_0805_2012Metric | R17 |
Pulsometer design files
The KiCad project lives in the Matii178/Pulsometer repository on GitHub; these links point at the commit this page was built from.
Pulsometer: common questions
How big is the Pulsometer PCB?
The Pulsometer measures 63.3 × 40.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pulsometer?
31 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pulsometer design files?
From the Matii178/Pulsometer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pulsometer design in my own project?
The repository has no license, so all rights stay with Matii178. Use it as a reference, and ask the author before reusing the design.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2k