Typeing machine

MatsDevOfficial·typeing-machine·EDA/Macropad.kicad_pcb

Typeing machine PCB layout, top view — open source board by MatsDevOfficial

About the Typeing machine PCB

Typeing machine is an open source PCB design by MatsDevOfficial, published on GitHub. It is a 2-layer board measuring 95.4 × 99.9 mm, with 28 components from 5 distinct parts.

Other key parts include the MOUDLE-SEEEDUINO-XIAO. By type, the board carries 14 diodes, 12 switches, 1 IC and 1 connector.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

Me, completely redesigning my macropad! I went with a "cooler" design, and bc i needed the space for traces and diodes filled up the empty space with a little bit of storage.

Me, completely redesigning my macropad! I went with a "cooler" design, and bc i needed the space for traces and diodes filled up the empty space with a little bit of storage.

So, I normally kind of dread a pcb; thats bc I dont have a soldering iron. But since that is includes or I will ask a TOA very nicely thats fixed. I personally kind of use a lot of vias, but it still looks good too me.

Typeing machine, from the project README
From the project README

Main components on the Typeing machine

Typeing machine bill of materials (BOM)

28 components, 5 distinct parts.

QtyPartRefs
1
MOUDLE-SEEEDUINO-XIAO
U1
1
Conn_01x04_Pin
J1
12
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +4
12
D
D1, D2, D3, D6, D7, D8, D9, D10 +4
2
SK6812MINI-E
D17, D18

Typeing machine design files

The KiCad project lives in the MatsDevOfficial/typeing-machine repository on GitHub; these links point at the commit this page was built from.

Typeing machine: common questions

How big is the Typeing machine PCB?

The Typeing machine measures 95.4 × 99.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Typeing machine?

28 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Typeing machine design files?

From the MatsDevOfficial/typeing-machine repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Typeing machine design in my own project?

The repository has no license, so all rights stay with MatsDevOfficial. Use it as a reference, and ask the author before reusing the design.

Similar boards