LoRA-Talkie

matthew-the-king·LoRA-Talkie·PCB/LoRA_Talkie.kicad_pcb

LoRA-Talkie PCB layout, top view — open source STM32 board by matthew-the-king

About the LoRA-Talkie PCB

LoRA-Talkie is an open source STM32 PCB design by matthew-the-king, published on GitHub. It is a 2-layer board measuring 62.8 × 85.9 mm, with 68 components from 35 distinct parts.

Its main chip is the STM32L051C8TX, from the STM32 family. Other key parts include the Wio-SX1262, BQ25188YBGR, BQ298215RUGR, TPD4S012DRYR and MCP16362T-E_NMX. By type, the board carries 24 capacitors, 22 resistors, 7 ICs, 6 switches, 3 connectors and 2 inductors.

It belongs with the rf & radio and power & battery designs in this gallery.

From the project

Battery:Link,$10.02 LCD Screen:Link, $13.94 Use JLCPCB for the cheapest board cost; it is around $8 for 5 boards, plus $15 for shipping. # FIRMWARE

Battery:Link,$10.02 LCD Screen:Link, $13.94 Use JLCPCB for the cheapest board cost; it is around $8 for 5 boards, plus $15 for shipping. # FIRMWARE

Not much here; I have not got the boards yet.

LoRA-Talkie, from the project README
From the project README

Main components on the LoRA-Talkie

Wio-SX1262STM32L051C8TXBQ25188YBGRBQ298215RUGRTPD4S012DRYRMCP16362T-E_NMXUT6K3TCR

LoRA-Talkie bill of materials (BOM)

68 components, 35 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Wio-SX1262
WIO-SX1262_C9900174795
U1
1
STM32L051C8TX
STM32L051C8Tx
U2
1
BQ25188YBGR
U3
1
BQ298215RUGR
U4
1
TPD4S012DRYR
U5
1
MCP16362T-E_NMX
U6
1
UT6K3TCR
U7
1
MMBT3904
Q1
1
USB_Charging
J1
1
CONN_01X06_PIN
Conn_01x06_Pin
J2
1
5051104091
J3
1
Holder
B1
1
CEM-1203_42_
LS1
1
Emergency_Button
S1
5
MX1A-E1NW
CHERRY
SW1, SW2, SW3, SW4, SW5
1
100V
D1
1
120R
FB1
1
1.5UH
1.5uH
L1
1
1UF
1uF
C1
7
10UF
10uF
C2, C4, C6, C7, C16, C20, C24
Show 15 more
QtyPartRefs
12
0.1UF
0.1uF
C3, C5, C9, C10, C11, C12, C13, C14 +4
1
330NF
330nF
C8
1
470UF
470uF
C17
2
22UF
22uF
C22, C23
2
5.1kΩ
R1, R2
10
10kΩ
R3, R4, R5, R6, R7, R8, R11, R20 +2
1
0.001Ω
R9
1
31.6kΩ
R10
1
100kΩ
R12
1
300Ω
R13
1
20Ω
R14
1
100Ω
R15
2
4.7kΩ
R16, R17
1
3.74Ω
R18
1
1kΩ
R19

LoRA-Talkie design files

The KiCad project lives in the matthew-the-king/LoRA-Talkie repository on GitHub; these links point at the commit this page was built from.

LoRA-Talkie: common questions

What microcontroller does the LoRA-Talkie use?

The LoRA-Talkie is built around the STM32L051C8TX, from the STM32 family.

How big is the LoRA-Talkie PCB?

The LoRA-Talkie measures 62.8 × 85.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LoRA-Talkie?

68 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the LoRA-Talkie design files?

From the matthew-the-king/LoRA-Talkie repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the LoRA-Talkie design in my own project?

The repository has no license, so all rights stay with matthew-the-king. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the LoRA-Talkie without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards