2 open source boards using the BQ298215RUGR

Real designs built with the BQ298215RUGR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The BQ298215RUGR in open source designs

The gallery holds 2 open source boards using the BQ298215RUGR from 2 GitHub repositories; a typical one measures about 76.4 × 65.5 mm and carries around 181 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is TeleSTERN by shorlee.

Microcontrollers on boards using the BQ298215RUGR

What boards using the BQ298215RUGR are built for

BQ298215RUGR: common questions

Where can I find a BQ298215RUGR reference design?

Each of the 2 boards on this page is a real design using the BQ298215RUGR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the BQ298215RUGR use?

Most are built on STM32 (2).

How big is a typical board using the BQ298215RUGR?

The median is 76.4 × 65.5 mm, and 50% are two-layer designs.

What is the most popular open source board using the BQ298215RUGR?

By GitHub stars, TeleSTERN by shorlee, with 3 stars.

Can I simulate one of these boards using the BQ298215RUGR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part