HardLabs

Mt6835-hoverboard motor

mcells·mt6835-hoverboard-motor

Mt6835-hoverboard motor PCB layout, top view — open source board by mcells

About the Mt6835-hoverboard motor PCB

Mt6835-hoverboard motor is an open source PCB design by mcells, published on GitHub. It is a 2-layer board measuring 24 × 32 mm, with 7 components from 5 distinct parts.

Other key parts include the MT6835. By type, the board carries 3 connectors, 2 capacitors, 1 IC and 1 diode.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

MT6835 magnetic Encoder Breakout board, eg. for mounting inside Hoverboard motors

Installing the sensor board inside a Hoverboard motor requires you to have access to the following tools: - A Hoverboard motor and - A sensor board (obviously...) - A drill press (though using a hand drill might work, if you are careful) - 5mm HSS drill - 2mm HSS drill for marking the locating holes - 1,6mm or 1,7mm HSS drill for the M2 threads - M2 tap - two M2 screws for mounting the sensor - soldering stuff - a saw or dremel to cut out the round part of the PCB

Mt6835-hoverboard motor, from the project README
From the project README

Main components on the Mt6835-hoverboard motor

MT6835

Mt6835-hoverboard motor bill of materials (BOM)

7 components, 5 distinct parts.

QtyPartRefs
1
MT6835
U1
1
PinHeader_1x06_P1.27mm_Vertical
J1
2
PinHeader_1x06_P1.00mm_Vertical
J2, J3
1
BDFN2A051U
D1
2
0.1µF
C1, C2

Mt6835-hoverboard motor design files

The KiCad project lives in the mcells/mt6835-hoverboard-motor repository on GitHub; these links point at the commit this page was built from.

Mt6835-hoverboard motor: common questions

How big is the Mt6835-hoverboard motor PCB?

The Mt6835-hoverboard motor measures 24 × 32 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Mt6835-hoverboard motor?

7 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Mt6835-hoverboard motor design files?

From the mcells/mt6835-hoverboard-motor repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Mt6835-hoverboard motor design in my own project?

The repository has no license, so all rights stay with mcells. Use it as a reference, and ask the author before reusing the design.

Similar boards