HardLabs

Swindle ch32 revH

mean00·swindle·kicad/ch32v3x/swindle_revH/swindle_ch32_revH.kicad_pcb

Swindle ch32 revH PCB layout, top view — open source STM32 board by mean00

About the Swindle ch32 revH PCB

Swindle ch32 revH is an open source STM32 PCB design by mean00, published on GitHub. It is a 2-layer board measuring 49.8 × 33.3 mm, with 37 components from 25 distinct parts.

Its main chip is the CH32V303RCT6, from the STM32 family. Other key parts include the LM1117-3.3, 3V->VTREF, VTREF->3V, VTREF<->3V and RT9013-33GB. By type, the board carries 11 capacitors, 7 resistors, 6 ICs, 6 connectors, 2 crystals and 2 diodes.

It belongs with the usb & debug tools designs in this gallery.

From the project

A custom version of the blackMagic probe with rust in it

Pick the pre-built firmware for your board or build from source.

'see wiki for exact pinout' ### 3. Start debugging

Or use any GDB frontend (VS Code, CLion, etc.) — just point it to the serial port.

This project uses CMake with presets for each target platform.

There is a devpod/docker build environment included.

- CMake ≥ 3.21 - ARM GCC toolchain (arm-none-eabi-gcc) or LLVM/Clang - RISC-V toolchain (for CH32V targets) - Rust toolchain (for the GDB interface)

Swindle ch32 revH, from the project README
From the project README

Main components on the Swindle ch32 revH

CH32V303RCT6LM1117-3.33V->VTREFVTREF->3VVTREF<->3VRT9013-33GB

Swindle ch32 revH bill of materials (BOM)

37 components, 25 distinct parts.

QtyPartRefs
1
CH32V303RCT6
U1
1
LM1117-3.3
U2
1
3V->VTREF
U3
1
VTREF->3V
U4
1
VTREF<->3V
U5
1
RT9013-33GB
U6
1
8Mhz
Y1
1
PinSocket_1x05_P1.00mm_Vertical
x2
1
jtag
J1
1
Conn_01x03_Socket
J2
1
con2
J2_DFU1
1
Dbg
J3
1
USB
J4
1
Debug port
J5
1
PinSocket_1x05_P1.00mm_Vertical
PA4567
1
PIN1X3
PB567
1
SW_DIP_x01
RST1
2
LED
D1, D2
8
100n
C1, C5, C6, C7, C8, C9, C10, C11
2
22pf
C2, C3
Show 5 more
QtyPartRefs
1
100u
C4
2
1k
R1, R5
1
10k
R2
2
330
R3, R7
2
5.1k
R4, R6

Swindle ch32 revH design files

The KiCad project lives in the mean00/swindle repository on GitHub; these links point at the commit this page was built from.

Swindle ch32 revH: common questions

What microcontroller does the Swindle ch32 revH use?

The Swindle ch32 revH is built around the CH32V303RCT6, from the STM32 family.

How big is the Swindle ch32 revH PCB?

The Swindle ch32 revH measures 49.8 × 33.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Swindle ch32 revH?

37 components, from 25 distinct parts. The full bill of materials is listed on this page.

Where can I download the Swindle ch32 revH design files?

From the mean00/swindle repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Swindle ch32 revH design in my own project?

The repository has no license, so all rights stay with mean00. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Swindle ch32 revH without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in swindle

Similar boards