53 open source boards using the RT9013-33GB
Real designs built with the RT9013-33GB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
NxtPX4V2
ArduPilot
33 × 27 mm122 parts4LNo license244RP2040/RP2350
ErgoSNM right
siderakb
115.6 × 106.7 mm101 parts2LCERN-OHL-P-2.0170RP2040/RP2350
Rp micro
siderakb
17.8 × 33 mm35 parts2LCERN-OHL-P-2.067RP2040/RP2350
PNCATEHO Welcome
aroum
85.6 × 54 mm58 parts2LCERN-OHL-P-2.063STM32
OpenDrone HW AIO FC F405
phonght32
34 × 34 mm211 parts8LMIT50RISC-V
AIO
ErBWs
63.1 × 63.5 mm155 parts4LGPL-3.034QueDriver
Zen-and-the-Art-of-Balanced-Bike
75 × 48 mm131 parts4LGPL-3.017STM32
Hector
RickKross
275.7 × 105.4 mm178 parts2LCERN-OHL-W-2.016Dongle pro
fcjr
26 × 98 mm99 parts4LApache-2.016Calcite60 Keyboard
siderakb
226 × 94.2 mm175 parts2LCERN-OHL-P-2.011STM32
Goatfc bones
Torie3
30 × 26 mm54 parts4LCC-BY-NC-4.04ESP32
Tiny2048
thip
50 × 50 mm51 parts2LCC-BY-NC-4.04STM32
Dragon controller
Doc-Raptor
100 × 95 mm84 parts2LNo license3STM32
Qnot1
SushEdge
34 × 34 mm211 parts8LNo license1STM32
Sphale
siderakb
17.8 × 33 mm29 parts2LMIT1STM32
Jetson Xavier/Orin NX + PX4 Board
PranavNedunghat
139 × 57.4 mm478 parts8LApache-2.00STM32
Qnot
SushEdge
34 × 34 mm211 parts8LNo license0RP2040/RP2350
Calcite60 Keyboard
siderakb
295 × 105 mm188 parts2LCERN-OHL-P-2.00RP2040/RP2350
Yec60-
limiez1011
312 × 98 mm153 parts2LGPL-3.00STM32
FC AniH743
CosShin
50 × 45 mm124 parts4LMIT0STM32
ArduH743-fc
KingFish233
38 × 38 mm123 parts4LNo license0STM32
NxtPX4V2
HertZhang
33 × 27 mm122 parts4LNo license0ESP32
Dronekit pro
AbdulAzeez0001
36 × 36 mm119 parts4LNo license0RP2040/RP2350
4in gps
sonicavionics
84.1 × 61.7 mm84 parts4LMIT0RP2040/RP2350
RotaryPositionEncoder
X-Green
33 × 33 mm65 parts4LNo license0ESP32
Rubber ducky
TomasD-git
17.3 × 46.7 mm47 parts4LGPL-3.00ESP32
YerraGlasses
rbala25
74.5 × 21.5 mm40 parts4LNo license0RP2040/RP2350
CTC Ducky - based on RP Micro
challengethecyber
89.2 × 99.8 mm35 parts2LMIT0ESP32
Ducktape
sectersion
65 × 22 mm22 parts2LNo license0RP2040/RP2350
Left
siderakb
115.6 × 106.7 mm98 parts2LCERN-OHL-P-2.0170MotherBoard
ErBWs
56.7 × 59 mm62 parts2LGPL-3.034STM32
Gd32f303 revG
mean00
49.2 × 31.7 mm42 parts2LNo license19RISC-V
QueCtrl
Zen-and-the-Art-of-Balanced-Bike
75 × 48 mm53 parts4LGPL-3.017Dongle lite
fcjr
16 × 55 mm56 parts6LApache-2.016RP2040/RP2350
Calcite52 Keyboard
siderakb
231.1 × 97.8 mm140 parts2LCERN-OHL-P-2.011Badge2
aramcon-badge
3.3 × 20.3 mm71 parts2LNo license6
How designs wire the RT9013-33GB
Read from the KiCad layouts of 32 open source designs, one per repository: what each pin of the RT9013-33GB connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 30 of 32 designs, most often 1 µF (then 100 nF).
- The VOUT pin has a decoupling capacitor on 29 of 32 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: 5V 69% · a signal 31% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| NCpin 4 | Connected to: Not connected 94% | — |
| VOUTpin 5 | Connected to: 3.3V 59% · a signal 41% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include NxtPX4V2 by ArduPilot, ErgoSNM right by siderakb, Rp micro by siderakb and PNCATEHO Welcome by aroum.
The RT9013-33GB in open source designs
The gallery holds 53 open source boards using the RT9013-33GB from 33 GitHub repositories; a typical one measures about 49.8 × 43.8 mm and carries around 84 components.
53% are two-layer designs, the rest use four layers or more, and 62% carry an open source license.
The most starred is NxtPX4V2 by ArduPilot.
Parts used alongside the RT9013-33GB
Microcontrollers on boards using the RT9013-33GB
What boards using the RT9013-33GB are built for
RT9013-33GB: common questions
Where can I find a RT9013-33GB reference design?
Each of the 53 boards on this page is a real design using the RT9013-33GB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the RT9013-33GB VIN pin?
The VIN pin has a decoupling capacitor on 30 of 32 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 32 open source designs using the RT9013-33GB.
What decoupling capacitors do designs use on the RT9013-33GB VOUT pin?
The VOUT pin has a decoupling capacitor on 29 of 32 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 32 open source designs using the RT9013-33GB.
What parts are used alongside the RT9013-33GB?
The RP2040, W25Q128JVS, BMI088, STM32H743VIH6 and MP9943GQ-Z appear in the most repositories here.
Which microcontrollers do boards using the RT9013-33GB use?
Most are built on STM32 (21), RP2040/RP2350 (13), ESP32 (6) and RISC-V (3).
How big is a typical board using the RT9013-33GB?
The median is 49.8 × 43.8 mm, and 53% are two-layer designs.
What is the most popular open source board using the RT9013-33GB?
By GitHub stars, NxtPX4V2 by ArduPilot, with 244 stars.
Can I simulate one of these boards using the RT9013-33GB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.