PCB SyringePump
About the PCB SyringePump
PCB SyringePump is an open source NXP PCB design by MedEngger, published on GitHub under the Unlicense license. It is a 2-layer board measuring 83.8 × 45.7 mm, with 24 components from 21 distinct parts.
Its main chip is the Teensy 3.2, from the NXP family. By type, the board carries 4 capacitors, 3 switches, 1 IC, 1 transistor, 1 connector and 1 fuse.
From the project
It is a PCB design and a sample program for the SyringePump.
An open-source Syringe Pump PCB designed for precision fluid control. This project is built around the Teensy 3.2 microcontroller and features robust power management, user inputs, and motor driver connectivity.
📂 Repository: https://github.com/MedEngger/PCB_SyringePump
This repository contains the KiCad PCB design files for a standalone syringe pump driver. The board integrates a high-performance microcontroller with a dedicated power supply circuit, rotary encoder interface, and tactile buttons for a complete user interface.
Main components on the PCB SyringePump
PCB SyringePump bill of materials (BOM)
24 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Teensy 3.2 | TEENSY_3.0-3.2&LC_OUTER_ROW | U1 |
| 1 | FQP47P06 | FQP47P06 | Q1 |
| 1 | +12-24Vin @ 2A | CUI_PJ-079AH | J1 |
| 1 | PEC11R | PEC11R4220FS0024 | ENC1 |
| 1 | 500mA PTC Fuse | BOURNS-MF-R025 | F1 |
| 3 | — | ALPS-SKRGAFD010 | S1, S2, S3 |
| 1 | NCS1S2405SC | MURATA-NCS1S2405SC | T1 |
| 1 | — | dummyfp0 | UNK_HOLE_0 |
| 1 | — | dummyfp1 | UNK_HOLE_1 |
| 1 | — | dummyfp2 | UNK_HOLE_2 |
| 1 | — | dummyfp3 | UNK_HOLE_3 |
| 1 | 2Amp Type 2AG Fast Blow | LITTLEFUSE-02540101Z | XF1 |
| 1 | — | TE-1-282834-0-DOUBLE | XJ1 |
| 1 | — | TE-282834-4-DOUBLE | XJ2 |
| 1 | — | TE-282834-6-DOUBLE | XJ3 |
| 1 | — | TE-282834-2-DOUBLE | XJ4 |
| 1 | 10Vz | BZX79C10 | D1 |
| 1 | 100uF | EEUFR1H101 | C1 |
| 2 | 1uF | K105Z20Y5VF5TL2 | C2, C3 |
| 1 | 10uF | TAP106K025SCS | C4 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100k | 0204_7 | R1 |
PCB SyringePump design files
The KiCad project lives in the MedEngger/PCB_SyringePump repository on GitHub; these links point at the commit this page was built from.
PCB SyringePump: common questions
What microcontroller does the PCB SyringePump use?
The PCB SyringePump is built around the Teensy 3.2, from the NXP family.
How big is the PCB SyringePump?
The PCB SyringePump measures 83.8 × 45.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCB SyringePump?
24 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the PCB SyringePump design files?
From the MedEngger/PCB_SyringePump repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PCB SyringePump design in my own project?
Yes, under the terms of its Unlicense license, which MedEngger chose for the repository.
Can I test firmware for the PCB SyringePump without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532
NXPMCL68
31.6 × 84.1 mm13 parts4LNo license532
NXPMCL65+
72.6 × 64.1 mm6 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532