2 open source boards using the Teensy_3.2
Real designs built with the Teensy_3.2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXPProto-8
marshalltaylorSFE
254 × 127 mm363 parts2LMIT15
NXPDropbot control board.
sci-bots
115 × 92 mm141 partsCustom license1
The Teensy_3.2 in open source designs
The gallery holds 2 open source boards using the Teensy_3.2 from 2 GitHub repositories; a typical one measures about 184.5 × 109.5 mm and carries around 252 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Proto-8 by marshalltaylorSFE.
Microcontrollers on boards using the Teensy_3.2
What boards using the Teensy_3.2 are built for
Teensy_3.2: common questions
Where can I find a Teensy_3.2 reference design?
Each of the 2 boards on this page is a real design using the Teensy_3.2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the Teensy_3.2 use?
Most are built on NXP (2).
How big is a typical board using the Teensy_3.2?
The median is 184.5 × 109.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the Teensy_3.2?
By GitHub stars, Proto-8 by marshalltaylorSFE, with 15 stars.
Can I simulate one of these boards using the Teensy_3.2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.