STM32 Nucleo144 Memory Shield
About the STM32 Nucleo144 Memory Shield
STM32 Nucleo144 Memory Shield is an open source PCB design by meerstern, published on GitHub. It is a 2-layer board measuring 70 × 97 mm, with 59 components from 16 distinct parts.
Other key parts include the SDRAM, SRAM, NOR_Flash, NAND FLASH and NUCLEO-144. By type, the board carries 24 capacitors, 6 ICs, 6 modules, 6 inductors and 5 resistors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Memory Shield for STM32 Nucleo144 with SDRAM x2, NANDFlash x1, SRAM x2, NOR Flash x1.
Main components on the STM32 Nucleo144 Memory Shield
STM32 Nucleo144 Memory Shield bill of materials (BOM)
59 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | SDRAM | TSOP-II-54_22.2x10.16mm_P0.8mm | U1, U2 |
| 2 | SRAM | TSOP-II-44_10.16x18.41mm_P0.8mm | U3, U4 |
| 1 | NOR_Flash | TSOP-I-56_18.4x14mm_P0.5mm | U5 |
| 1 | NAND FLASH | TSOP-I-48_18.4x12mm_P0.5mm | U6 |
| 2 | NUCLEO-144 | PinSocket_2x36_P2.54mm_Vertical | A1, A6 |
| 1 | NUCLEO-144 | PinSocket_2x08_P2.54mm_Vertical | A2 |
| 1 | NUCLEO-144 | PinSocket_2x15_P2.54mm_Vertical | A3 |
| 1 | NUCLEO-144 | PinSocket_2x10_P2.54mm_Vertical | A4 |
| 1 | NUCLEO-144 | PinSocket_2x17_P2.54mm_Vertical | A5 |
| 5 | 0 | R_0603_1608Metric | RX1, RX6, RX8, RX9, RX10 |
| 7 | 20k | R_0603_1608Metric | RX2, RX4, RX5, RX7, RX11, RX12, RX13 |
| 6 | FerriteBeads | L_0603_1608Metric | L1, L2, L3, L4, L5, L6 |
| 23 | 0.1u | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8 +15 |
| 1 | 10u | C_0805_2012Metric | C11 |
| 1 | 0 | R_0603_1608Metric | R1 |
| 4 | 20k | R_0603_1608Metric | R2, R3, R4, R5 |
STM32 Nucleo144 Memory Shield design files
The KiCad project lives in the meerstern/STM32_Nucleo144_Memory_Shield repository on GitHub; these links point at the commit this page was built from.
- Layoutns.kicad_pcb
STM32 Nucleo144 Memory Shield: common questions
How big is the STM32 Nucleo144 Memory Shield?
The STM32 Nucleo144 Memory Shield measures 70 × 97 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STM32 Nucleo144 Memory Shield?
59 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM32 Nucleo144 Memory Shield design files?
From the meerstern/STM32_Nucleo144_Memory_Shield repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the STM32 Nucleo144 Memory Shield design in my own project?
The repository has no license, so all rights stay with meerstern. Use it as a reference, and ask the author before reusing the design.
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979