HardLabs

Rev rb

mekatronik-achmadi·openpv·rev_rb-pcb/test1/rev_rb.kicad_pcb

Rev rb PCB layout, top view — open source STM32 board by mekatronik-achmadi

About the Rev rb PCB

Rev rb is an open source STM32 PCB design by mekatronik-achmadi, published on GitHub. It is a 2-layer board measuring 67.3 × 84.9 mm, with 54 components from 26 distinct parts.

Its main chip is the STM32F103RB, from the STM32 family. Other key parts include the PC817, 10-XX_B3F-10XX, MIC5219BM5_SOT23-5 and XC63FPM_SOT23. By type, the board carries 12 test points, 9 connectors, 9 diodes, 7 ICs, 4 resistors and 3 capacitors.

Main components on the Rev rb

STM32F103RBPC81710-XX_B3F-10XXMIC5219BM5_SOT23-5XC63FPM_SOT23

Rev rb bill of materials (BOM)

54 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F103RB
U1
3
PC817
U2, U3, U4
1
10-XX_B3F-10XX
U6
1
MIC5219BM5_SOT23-5
U7
1
XC63FPM_SOT23
U8
1
MOSFET-PCHANNELSMD
Q1
1
MOSFET-NCHANNELSMD
Q2
1
8Mhz
Y1
1
BARREL_JACK
CON1
1
audio-jack
J1
3
CONN_01X03
P1, P2, P-BOOT1
1
CONN_01X04
P-COMM1
3
CONN_01X02
P-MIC1, P-VDD1, P-XC1
2
C
CA1, CA3
2
33k
RA1, RA5
2
10k
RA2, RA7
12
TEST-POINT2
TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +4
1
CONN_01X02
VDD-VDDA1
1
D
D1
1
D_Schottky
D6
Show 6 more
QtyPartRefs
7
LED
D7, D8, D9, D10, D11, D12, D13
1
C
C4
2
22pF
C-XTAL1, C-XTAL2
2
330
R1, R5
1
10k
R2
1
4k7
R3

Rev rb design files

The KiCad project lives in the mekatronik-achmadi/openpv repository on GitHub; these links point at the commit this page was built from.

Rev rb: common questions

What microcontroller does the Rev rb use?

The Rev rb is built around the STM32F103RB, from the STM32 family.

How big is the Rev rb PCB?

The Rev rb measures 67.3 × 84.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Rev rb?

54 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Rev rb design files?

From the mekatronik-achmadi/openpv repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Rev rb design in my own project?

The repository has no license, so all rights stay with mekatronik-achmadi. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Rev rb without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in openpv

Similar boards