Stm32-dev board
micahpinto·stm32-dev-board·Hardware/STM32.kicad_pcb
About the Stm32-dev board
Stm32-dev board is an open source STM32 PCB design by micahpinto, published on GitHub under the MIT license. It is a 2-layer board measuring 41 × 31 mm, with 28 components from 16 distinct parts.
Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 13 capacitors, 5 resistors, 4 connectors, 2 ICs, 1 crystal and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
STM32F103 microcontroller board designed in KiCad – schematic, PCB layout and fabrication files
A compact 2-layer development board based on the STM32F103C8T6 microcontroller, designed in KiCad. Designed during my Master's as a hands-on project in microcontroller hardware and PCB design.

Main components on the Stm32-dev board
Stm32-dev board bill of materials (BOM)
28 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8T6 | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | 16MHZ 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_B_Micro | USB_Micro-B_Wuerth_629105150521 | J1 |
| 3 | CONN_01X04_PIN Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J2, J3, J4 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 1 | RED | LED_0603_1608Metric | D1 |
| 1 | 120R | L_0603_1608Metric | FB1 |
| 5 | 100N 100n | C_0402_1005Metric | C1, C2, C3, C4, C8 |
| 1 | 10N 10n | C_0402_1005Metric | C5 |
| 2 | 1µ | C_0402_1005Metric | C6, C7 |
| 2 | 10P 10p | C_0402_1005Metric | C9, C10 |
| 2 | 22µ | C_0805_2012Metric | C11, C12 |
| 1 | 10µ | C_0603_1608Metric | C13 |
| 1 | 10K 10k | R_0402_1005Metric | R1 |
| 4 | 1K5 1k5 | R_0402_1005Metric | R2, R3, R4, R5 |
Stm32-dev board design files
The KiCad project lives in the micahpinto/stm32-dev-board repository on GitHub; these links point at the commit this page was built from.
Stm32-dev board: common questions
What microcontroller does the Stm32-dev board use?
The Stm32-dev board is built around the STM32F103C8T6, from the STM32 family.
How big is the Stm32-dev board?
The Stm32-dev board measures 41 × 31 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Stm32-dev board?
28 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Stm32-dev board design files?
From the micahpinto/stm32-dev-board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Stm32-dev board design in my own project?
Yes, under the terms of its MIT license, which micahpinto chose for the repository.
Can I test firmware for the Stm32-dev board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k