Flight controller design
MickAvery·flight-controller-design
About the Flight controller design PCB
Flight controller design is an open source STM32 PCB design by MickAvery, published on GitHub. It is a 2-layer board measuring 45 × 45 mm, with 41 components from 22 distinct parts.
Its main chip is the STM32F405RG-LQFP64, from the STM32 family. Other key parts include the LD3985M33R, LSM9DS1 and MS5607. By type, the board carries 23 capacitors, 7 connectors, 5 resistors, 4 ICs, 1 crystal and 1 inductor.
It belongs with the robotics & motion designs in this gallery.
From the project
Design of my flight controller using KiCAD
Main components on the Flight controller design
Flight controller design bill of materials (BOM)
41 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LD3985M33R | LD3985MxxR | U1 |
| 1 | STM32F405RG-LQFP64 | STM32F405RxTx-LQFP64 | U2 |
| 1 | LSM9DS1 | LSM9DS1 | U3 |
| 1 | MS5607 | MS5607-02BA03 | U4 |
| 1 | 8MHz | XTAL_ECS-080-18-23G-JGN-TR | Y1 |
| 1 | ESC1 | Pin_Header_Straight_1x03_Pitch2.54mm | J1 |
| 1 | ESC2 | Pin_Header_Straight_1x03_Pitch2.54mm | J2 |
| 1 | ESC3 | Pin_Header_Straight_1x03_Pitch2.54mm | J3 |
| 1 | ESC4 | Pin_Header_Straight_1x03_Pitch2.54mm | J4 |
| 1 | RECEIVER | Pin_Header_Straight_1x03_Pitch2.54mm | J5 |
| 1 | SERIAL | Pin_Header_Straight_1x03_Pitch2.54mm | J6 |
| 1 | SWD | Pin_Header_Straight_1x05_Pitch2.54mm | J7 |
| 1 | BK1608HS601-T | BEADC1608X95N | L1 |
| 2 | 1μF | CAPC1608X90 | C1, C6 |
| 12 | 100nF | CAPC1005X55N | C2, C3, C7, C8, C9, C12, C14, C15 +4 |
| 2 | 10nF | CAPC1608X90 | C4, C20 |
| 2 | 10μF | CAPC1608X90 | C5, C17 |
| 1 | 4.7μF | CAPC1005X55N | C10 |
| 2 | 2.2μF | CAPC1608X90 | C11, C13 |
| 2 | 20pF | CAPC1608X90 | C21, C22 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 10k | RC0402FR-0710KL | R1, R2, R3, R4 |
| 1 | 100k | RC0402FR-07100KL | R5 |
Flight controller design design files
The KiCad project lives in the MickAvery/flight-controller-design repository on GitHub; these links point at the commit this page was built from.
- Layoutflight-ctrl-v2.kicad_pcb
Flight controller design: common questions
What microcontroller does the Flight controller design use?
The Flight controller design is built around the STM32F405RG-LQFP64, from the STM32 family.
How big is the Flight controller design PCB?
The Flight controller design measures 45 × 45 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Flight controller design?
41 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Flight controller design design files?
From the MickAvery/flight-controller-design repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Flight controller design design in my own project?
The repository has no license, so all rights stay with MickAvery. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Flight controller design without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k