5 open source boards using the LD3985M33R
Real designs built with the LD3985M33R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Mainboard
daveshah1
150 × 90 mm709 parts8LMIT40STM32
Flight controller design
MickAvery
45 × 45 mm41 parts2LNo license1STM32
Tmb board
janfietz
99.1 × 95.3 mm160 parts2LCC-BY-SA-4.00.watch
silardg
23.9 × 19.8 mm28 parts2LNo license0Usbbase
daveshah1
65 × 50 mm55 parts4LMIT40
The LD3985M33R in open source designs
The gallery holds 5 open source boards using the LD3985M33R from 4 GitHub repositories; a typical one measures about 65 × 50 mm and carries around 55 components.
60% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is Mainboard by daveshah1.
What boards using the LD3985M33R are built for
LD3985M33R: common questions
Where can I find a LD3985M33R reference design?
Each of the 5 boards on this page is a real design using the LD3985M33R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LD3985M33R use?
Most are built on STM32 (2) and FPGA (1).
How big is a typical board using the LD3985M33R?
The median is 65 × 50 mm, and 60% are two-layer designs.
What is the most popular open source board using the LD3985M33R?
By GitHub stars, Mainboard by daveshah1, with 40 stars.
Can I simulate one of these boards using the LD3985M33R before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.