Usb vk hardware
Microsparky·usb-vk-hardware
About the Usb vk hardware PCB
Usb vk hardware is an open source STM32 PCB design by Microsparky, published on GitHub under the CERN-OHL-P-2.0 license. It is a 4-layer board measuring 65.6 × 66 mm, with 74 components from 23 distinct parts.
Its main chip is the STM32F401RCTx, from the STM32 family. Other key parts include the PEC12R-4xxxF, LT1963AxST-3.3, SN74LV1T125 and USBLC6-2SC6. By type, the board carries 28 capacitors, 25 resistors, 6 ICs, 6 diodes, 4 connectors and 4 switches.
From the project
Hardware for USB Volume Knob
Main components on the Usb vk hardware
Usb vk hardware bill of materials (BOM)
74 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PEC12R-4xxxF | PEC12R-4xxxF | U1 |
| 1 | LT1963AxST-3.3 | SOT-223-3_TabPin2 | U2 |
| 2 | SN74LV1T125 | SOT-23-5_HandSoldering | U3, U4 |
| 1 | STM32F401RCTx | LQFP-64_10x10mm_P0.5mm | U5 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U6 |
| 1 | X1G004451000200 | Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 1 | Conn_01x04 | Molex_PicoBlade_53261-0471_1x04-1MP_P1.25mm_Horizontal | J1 |
| 1 | Conn_01x09 | Molex_PicoBlade_53261-0971_1x09-1MP_P1.25mm_Horizontal | J2 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_Amphenol_12402012E212A | J3 |
| 1 | FTSH-105-01 | SAMTEC_FTSH-105-XX-X-DV | J4 |
| 2 | SW_Push | B3F-3xxx | SW1, SW2 |
| 2 | SW_Push | SW_SPST_B3U-1000P | SW3, SW4 |
| 6 | SK9822 | LED_RGB_5050-6 | D1, D2, D3, D4, D5, D6 |
| 20 | 100nF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C3, C4, C5, C7, C13, C14 +12 |
| 2 | 10uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C6, C8 |
| 2 | 2.2uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C9, C10 |
| 1 | 10nF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C11 |
| 1 | 1uF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C12 |
| 2 | 9pF | C_0402_1005Metric | C16, C17 |
| 5 | 200 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R3, R4, R7, R10 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 10 | 10k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R5, R6, R8, R9, R13, R14, R17 +2 |
| 5 | 0 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R11, R12, R15, R16, R19 |
| 5 | 5.1k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R21, R22, R23, R24, R25 |
Usb vk hardware design files
The KiCad project lives in the Microsparky/usb-vk-hardware repository on GitHub; these links point at the commit this page was built from.
- LayoutUSBVolumeKnob.kicad_pcb
Usb vk hardware: common questions
What microcontroller does the Usb vk hardware use?
The Usb vk hardware is built around the STM32F401RCTx, from the STM32 family.
How big is the Usb vk hardware PCB?
The Usb vk hardware measures 65.6 × 66 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Usb vk hardware?
74 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Usb vk hardware design files?
From the Microsparky/usb-vk-hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Usb vk hardware design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which Microsparky chose for the repository.
Can I test firmware for the Usb vk hardware without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k