10 open source boards using the STM32F401RCTx

Real designs built with the STM32F401RCTx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the STM32F401RCTx

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the STM32F401RCTx connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pins have a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 10 µF).
  • The VCAP1 pin has a capacitor to GND on 10 of 10 designs, most often 4.7 µF (then 2.2 µF).
  • The NRST pin has a capacitor to GND on 9 of 10 designs, most often 100 nF (then 100 pF).
  • The VREF+ pin has a decoupling capacitor on 9 of 10 designs, most often 1 µF (then 100 nF).
VBATpin 1Connected to: BATT 90%
  • Decoupling capacitor on 30% · 100 nF (6), 10 µF (1)
PC14pin 3Connected to: Signal 80% · not connected 20%
  • Capacitor to GND on 60% · 20 pF (4), 12 pF (1), 33 pF (1)
  • Crystal on 60% · 32.768 kHz (1)
PC15pin 4Connected to: Signal 80% · not connected 20%
  • Crystal on 60% · 32.768 kHz (1)
  • Capacitor to GND on 60% · 20 pF (4), 12 pF (1), 33 pF (1)
PH0pin 5Connected to: Signal 80% · not connected 20%
  • Capacitor to GND on 80% · 20 pF (4), 22 pF (1), 12 pF (1)
  • Crystal on 70%
PH1pin 6Connected to: Signal 80% · not connected 20%
  • Capacitor to GND on 80% · 20 pF (4), 22 pF (1), 12 pF (1)
  • Crystal on 70%
NRSTpin 7Connected to: A connector 50%
  • Capacitor to GND on 90% · 100 nF (7), 100 pF (1)
  • Pull-up to 3.3V on 30% · 10 kΩ (2), 1 kΩ (1)
PC0pin 8Connected to: Not connected 70% · a signal 30%
PC1pin 9Connected to: Not connected 80% · a signal 20%
PC2pin 10Connected to: Not connected 80% · a signal 20%
PC3pin 11Connected to: Not connected 70% · a signal 30%
VSSApin 12Connected to: GND 100%
VREF+pin 13Connected to: 3.3V 100%
  • Decoupling capacitor on 90% · 1 µF (7), 100 nF (4), 10 nF (1)
VSSpin 18, 31, 47, 63Connected to: GND 100%
VDDpin 19, 32, 48, 64Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (40), 10 µF (4), 4.7 µF (1)
PA7pin 23Connected to: TLV9001IDBVR 40%, a connector 20%
  • Series capacitor on 40% · 330 pF (4)
  • Series resistor on 40% · 3.3 kΩ (4)
PC4pin 24Connected to: Not connected 60% · a signal 40%
PC5pin 25Connected to: Not connected 70% · a signal 30%
PB0pin 26Connected to: Not connected 70% · a signal 30%
PB1pin 27Connected to: Not connected 70% · a signal 30%
PB2pin 28Connected to: Not connected 70% · a signal 30%
VCAP1pin 30Connected to: Signal 100%
  • Capacitor to GND on 100% · 4.7 µF (8), 2.2 µF (3)
PB12pin 33Connected to: Not connected 60% · a signal 40%
PB13pin 34Connected to: Not connected 60% · a signal 40%
PC8pin 39Connected to: A connector 40% · not connected 20%
  • Pull-up to 3.3V on 40% · 10 kΩ (4)
PC9pin 40Connected to: Not connected 50% · a signal 50%
  • Pull-up to 3.3V on 30% · 5.1 kΩ (2), 2.2 kΩ (1)
PA8pin 41Connected to: Not connected 50% · a signal 50%
  • Pull-up to 3.3V on 30% · 5.1 kΩ (2), 2.2 kΩ (1)
PA11pin 44Connected to: A connector 20%
  • Series resistor on 40% · 22 Ω (4)
PA12pin 45Connected to: A connector 20% · not connected 20%
  • Series resistor on 40% · 22 Ω (4)
PA15pin 50Connected to: Not connected 60% · a signal 40%
PC10pin 51Connected to: Not connected 70% · a signal 30%
PC11pin 52Connected to: Not connected 60% · a signal 40%
PC12pin 53Connected to: A connector 50% · not connected 20%
  • Pull-up to 3.3V on 40% · 10 kΩ (4)
PD2pin 54Connected to: A connector 40% · not connected 30%
  • Pull-up to 3.3V on 40% · 10 kΩ (4)
PB4pin 56Connected to: Not connected 70% · a signal 30%
PB5pin 57Connected to: Not connected 60% · a signal 40%
BOOT0pin 60Connected to: Signal 100%
  • Resistor to GND on 80% · 10 kΩ (7), 5.1 kΩ (1)
PB8pin 61Connected to: Not connected 60% · a signal 40%
PB9pin 62Connected to: Not connected 60% · a signal 40%

20 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Fsk energymeter by luftaquila, Bonjour-STM32 by emoestudio, TS Tracker by tor1kk and Ollyfc by rland93.

The STM32F401RCTx in open source designs

The gallery holds 10 open source boards using the STM32F401RCTx from 10 GitHub repositories; a typical one measures about 90 × 74 mm and carries around 79 components.

60% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Fsk energymeter by luftaquila.

Microcontrollers on boards using the STM32F401RCTx

What boards using the STM32F401RCTx are built for

STM32F401RCTx: common questions

Where can I find a STM32F401RCTx reference design?

Each of the 10 boards on this page is a real design using the STM32F401RCTx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32F401RCTx VDD pin?

The VDD pins have a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 10 open source designs using the STM32F401RCTx.

How is the STM32F401RCTx VCAP1 pin connected?

The VCAP1 pin has a capacitor to GND on 10 of 10 designs, most often 4.7 µF (then 2.2 µF). Counted from the KiCad layouts of 10 open source designs using the STM32F401RCTx.

How is the STM32F401RCTx NRST pin connected?

The NRST pin has a capacitor to GND on 9 of 10 designs, most often 100 nF (then 100 pF). Counted from the KiCad layouts of 10 open source designs using the STM32F401RCTx.

What parts are used alongside the STM32F401RCTx?

The AMS1117-3.3, AMC3311QDWERQ1, L78L05ABUTR, LM2675MX-5.0/NOPB and LM324DR appear in the most repositories here.

Which microcontrollers do boards using the STM32F401RCTx use?

Most are built on STM32 (10).

How big is a typical board using the STM32F401RCTx?

The median is 90 × 74 mm, and 60% are two-layer designs.

What is the most popular open source board using the STM32F401RCTx?

By GitHub stars, Fsk energymeter by luftaquila, with 13 stars.

Can I simulate one of these boards using the STM32F401RCTx before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part