Cc1352-swim thermo
mik4el·cc1352-swim-thermo
About the Cc1352-swim thermo PCB
Cc1352-swim thermo is an open source TI MSP430/CC PCB design by mik4el, published on GitHub under the Apache-2.0 license. It is a 4-layer board measuring 49.8 × 41.9 mm, with 55 components from 38 distinct parts.
Its main chip is the CC1352R1F3RGZR, from the TI MSP430/CC family. Other key parts include the 0850BM14E0016T, 2450BM14G0011T, TLV713, TLC5973 and MCP16251. By type, the board carries 22 capacitors, 7 resistors, 6 ICs, 6 connectors, 6 inductors and 2 crystals.
It belongs with the rf & radio and sensors designs in this gallery.
From the project
Software and hardware for dual band radio high accuracy swim thermometer
Requires Code Composer Studio (CCS) v8 and sdk version v2.30.00.xx for software and Kicad for hardware since it was developed on pre-production silicon (rev. C). Software is programmed using the CC1352 Launchpad.
Hardware version 1.1 tested with radio range over 500m+ using long range 14dBm and simple dipole antenna.

Main components on the Cc1352-swim thermo
Cc1352-swim thermo bill of materials (BOM)
55 components, 38 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0850BM14E0016T | 0850BM14E0016 | U1 |
| 1 | CC1352R1F3RGZR | CC1352R1F3RGZR | U2 |
| 1 | 2450BM14G0011T | 0850BM14E0016 | U3 |
| 1 | TLV713 | SOT-23-5 | U4 |
| 1 | TLC5973 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U5 |
| 1 | MCP16251 | SOT-23-6 | U6 |
| 1 | 2N7002 | SOT-23 | Q1 |
| 1 | Crystal_GND24 | TSX-3225 | Y1 |
| 1 | 32.768kHz | FC-135 | Y2 |
| 1 | LMT_70_1 | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J1 |
| 1 | LMT_70_2 | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J2 |
| 1 | SMA | SMA_Amphenol_132289_EdgeMount | J3 |
| 1 | U.FL | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J4 |
| 1 | USB_B_Micro | USB_Mini-B_Lumberg_2486_01_Horizontal | J5 |
| 1 | Conn_02x05_Odd_Even | Pin_Header_Straight_SMT_02x05_1_27mm | J6 |
| 1 | Antenna | 2450AT45A100 | AE1 |
| 1 | Battery | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | BT1 |
| 1 | Jumper_NC | Pin_Header_Straight_1x02 | JP1 |
| 1 | SW_Push | SKSLLAE010 | SW1 |
| 1 | ASMB-MTB0-0A3A2 | ASMB-MTB0-0A3A2 | D1 |
Show 18 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 6.8uH | L_0805_2012Metric | L1 |
| 2 | DNM | L_0402_1005Metric | L2, L16 |
| 2 | BLM18HE152SN1 | L_0603_1608Metric | L6, L9 |
| 1 | 4.7uH | VLS3015E | L10 |
| 2 | 1uF | C_0603_1608Metric | C1, C21 |
| 4 | 12pF | C_0603_1608Metric | C2, C4, C13, C15 |
| 9 | 100nF | C_0603_1608Metric | C3, C5, C7, C9, C10, C11, C22, C23 +1 |
| 2 | 22uF | C_0603_1608Metric | C6, C8 |
| 1 | 4.7uF | C_0603_1608Metric | C25 |
| 1 | 10uF | C_0603_1608Metric | C26 |
| 2 | 100pF | C_0402_1005Metric | C33, C35 |
| 1 | DNM | C_0402_1005Metric | C34 |
| 1 | 100 | R_0603_1608Metric | R1 |
| 2 | 10K | R_0603_1608Metric | R2, R7 |
| 1 | 100K | R_0603_1608Metric | R3 |
| 1 | 1.5K | R_0603_1608Metric | R4 |
| 1 | 3.09M | R_0603_1608Metric | R5 |
| 1 | 1M | R_0603_1608Metric | R6 |
Cc1352-swim thermo design files
The KiCad project lives in the mik4el/cc1352-swim-thermo repository on GitHub; these links point at the commit this page was built from.
Cc1352-swim thermo: common questions
What microcontroller does the Cc1352-swim thermo use?
The Cc1352-swim thermo is built around the CC1352R1F3RGZR, from the TI MSP430/CC family.
How big is the Cc1352-swim thermo PCB?
The Cc1352-swim thermo measures 49.8 × 41.9 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Cc1352-swim thermo?
55 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Cc1352-swim thermo design files?
From the mik4el/cc1352-swim-thermo repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Cc1352-swim thermo design in my own project?
Yes, under the terms of its Apache-2.0 license, which mik4el chose for the repository.
Can I test firmware for the Cc1352-swim thermo without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug TI MSP430/CC firmware against it before you order a PCB.
Similar boards
TI MSP430/CC
Pluto
carrotIndustries
24.4 × 24.4 mm36 parts2LGPL-3.0536TI MSP430/CC
Apimote
riverloopsec
83.3 × 33.4 mm80 parts4LTAPR-OHL-1.089TI MSP430/CC
Toniebox
toniebox-reverse-engineering
88 × 102 mm11 parts2LNo license36TI MSP430/CC
Nsumo hardware
artfulbytes
50 × 65 mm73 parts2LMIT33TI MSP430/CC
Elektronika-1
BenjaminSoelberg
29.5 × 29.5 mm14 parts4LGPL-3.029TI MSP430/CC
MSP430 Breadstick - Apple Sauce
upsidedownlabs
18.5 × 65.8 mm31 parts2LCERN-OHL-S-2.021