3wire intercom retrofit lee dan ir207
mikepii·3wire-intercom-retrofit-lee-dan-ir207
About the 3wire intercom retrofit lee dan ir207 PCB
3wire intercom retrofit lee dan ir207 is an open source PCB design by mikepii, published on GitHub. It is a 2-layer board measuring 76 × 22 mm, with 4 components from 3 distinct parts.
By type, the board carries 2 capacitors, 1 connector and 1 resistor.
It belongs with the retro computing designs in this gallery.
From the project
Circuit retrofit for Lee Dan IR207 intercom to work with a 3 wire system
Circuit (KiCad project) to create a replacement board for the 4-wire Lee Dan IR207 apartment intercom to work in a 3-wire system.
You can order the PCB from a fabricator such as OSH Park by uploading the zip of gerber/drill files (see Releases on GitHub). You can also order it fully assembled from fabricators providing assembly service by sending them the Bill of Materials (BOM) file along with that zip.

3wire intercom retrofit lee dan ir207 bill of materials (BOM)
4 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1729021 Screw_Terminal_01x03 | TerminalBlock_Phoenix_PT-1,5-3-5.0-H_1x03_P5.00mm_Horizontal | J1 |
| 2 | 226KXM050M 25μF/25V | CP_Radial_D5.0mm_P2.00mm | C1, C2 |
| 1 | MFP-25BRD52-4K7 4K7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
3wire intercom retrofit lee dan ir207 design files
The KiCad project lives in the mikepii/3wire-intercom-retrofit-lee-dan-ir207 repository on GitHub; these links point at the commit this page was built from.
- Layout3wire.kicad_pcb
- Schematic3wire.kicad_sch
3wire intercom retrofit lee dan ir207: common questions
How big is the 3wire intercom retrofit lee dan ir207 PCB?
The 3wire intercom retrofit lee dan ir207 measures 76 × 22 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 3wire intercom retrofit lee dan ir207?
4 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the 3wire intercom retrofit lee dan ir207 design files?
From the mikepii/3wire-intercom-retrofit-lee-dan-ir207 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 3wire intercom retrofit lee dan ir207 design in my own project?
The repository has no license, so all rights stay with mikepii. Use it as a reference, and ask the author before reusing the design.
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k