SMBee

milelo·SMBeeKiCad

SMBee PCB layout, top view — open source PIC board by milelo

About the SMBee PCB

SMBee is an open source PIC PCB design by milelo, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 42.5 × 57 mm, with 14 components from 5 distinct parts.

Its main chip is the PIC10LF322-I/OT, from the PIC family. By type, the board carries 6 connectors, 5 LEDs, 1 IC, 1 battery holder and 1 switch.

From the project

KiCad 5 design for SMBee PCB

Related GitHub projects: [SMBee Firmware] - The firmware source, build instructions and binaries. [SMBeeHive Programmer] - A low cost custom-jig and programmer for the SMBee.

It's fairly easy and inexpensive to have SMBee PCBs manufactured in low or high quantities. This is the information you need:

The Gerber files defines the various layers that constitute a PCB design. The Gerber format is an open-standard 2D vector image format.

SMBee, from the project README
From the project README

Main components on the SMBee

PIC10LF322-I/OT

SMBee bill of materials (BOM)

14 components, 5 distinct parts.

QtyPartRefs
1
PIC10LF322-I/OT
U1
6
CONN_PIN
J1, J2, J3, J4, J5, J6
1
3000TR
BT1
1
ALPS_SKRB
SW1
5
LED
Dal1, Dar1, Del1, Der1, Dst1

SMBee design files

The KiCad project lives in the milelo/SMBeeKiCad repository on GitHub; these links point at the commit this page was built from.

SMBee: common questions

What microcontroller does the SMBee use?

The SMBee is built around the PIC10LF322-I/OT, from the PIC family.

How big is the SMBee PCB?

The SMBee measures 42.5 × 57 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SMBee?

14 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the SMBee design files?

From the milelo/SMBeeKiCad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the SMBee design in my own project?

Yes, under the terms of its CC-BY-4.0 license, which milelo chose for the repository.

Can I test firmware for the SMBee without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

Similar boards